PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 65194
65194 ✓ Verified by PartsTable
Disguise · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The DEFLECTOR,DIRT AND LIQUID is a Disguise industrial component. Key specifications include material: IRON CAST. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-509-2129, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
65194
NSN: 5310-00-509-2129
FSC: 5310
CAGE: 93742 — DRS NAVAL POWER SYSTEMS INC DBA DRS POWER & CONTROL TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialIRON CAST
NSN5310-00-509-2129
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 65194 · Disguise ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECESSED
•
MATERIAL: STEEL OVERALL
•
RECESS DEPTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.434 INCHES MINIMUM AND 1.454 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.817 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORRECESSED
MATERIALSTEEL OVERALL
RECESS DEPTH0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.434 INCHES MINIMUM AND 1.454 INCHES MAXIMUM IN
OVERALL HEIGHT0.228 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
HOLE DIAMETER0.817 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
SPECIAL FEATURESONE INTERNAL KEY WIDTH 0.234 AND LENGTH 0.125
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
668879Interchangeable
interchangeable cross-reference
interchangeable
517-260-01 PIECInterchangeable
interchangeable cross-reference
interchangeable
40309Interchangeable
interchangeable cross-reference
interchangeable
65A81C938Interchangeable
interchangeable cross-reference
interchangeable
02261-0280-21Interchangeable
interchangeable cross-reference
interchangeable
68B618000-281Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 65194?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65194?
65194 is a DEFLECTOR,DIRT AND LIQUID manufactured by Disguise.
What parts can replace 65194?
There are 19 known substitutes for 65194: 668879, 517-260-01 PIEC, 40309 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 65194?
65194 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-509-2129. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65194

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026