PartsTable
Technical Data Sheet
Download PDF

401-4694900 ITE — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

401-4694900 ITE: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE BAND, overall_width: 0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.085 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-891-3410, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
401-4694900 ITE
NSN: 5340-00-891-3410
FSC: 5340 — Hardware, Commercial
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE BAND
overall_width0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.085 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
loop_inside_diameter0.438 INCHES NOMINAL IN
material_document_and_classificationMIL-M-20693 COMP A TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.848 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.608 INCHES NOMINAL IN
NSN5340-00-891-3410
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 401-4694900 ITE MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 COMP A TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.085 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.848 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.608 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 COMP A TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
OVERALL WIDTH0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS0.085 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.848 INCHES MINIMUM AND 0.868 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.608 INCHES NOMINAL IN
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE BAND
LOOP INSIDE DIAMETER0.438 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
SAE-AS25281Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
457-5713Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS25281F7Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340008913410Reference document
Same NSN cross-reference
Reference document — Secondary reference
A07996Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 401-4694900 ITE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 401-4694900 ITE?
401-4694900 ITE is a CLAMP,LOOP.
What parts can replace 401-4694900 ITE?
There are 5 known substitutes for 401-4694900 ITE: SAE-AS25281, 457-5713, MS25281F7 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 401-4694900 ITE?
401-4694900 ITE is cataloged in the U.S. Government catalog under NSN 5340-00-891-3410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 401-4694900 ITE