PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 40-6-34
40-6-34 ✓ Verified by PartsTable
Sandberg · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

A Sandberg Design Cover effectively protects your phone against marks and scratches while also giving it a more personal look. Key specifications include material: ALUMINUM BODY, body_style: RECTANGULAR, TERMINAL/TERMINALS ON OPPOSITE SURFACES, power_rating: 150.0 WATTS AVERAGE AND 10.0 KILOWATTS PEAK, bore_diameter: 1.5000 INCHES NOMINAL IN, overall_width: 3.060 INCHES NOMINAL IN, alignment_type: RIGID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40-6-34
NSN: 3110-00-198-1765
FSC: 3110
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialALUMINUM BODY
body_styleRECTANGULAR, TERMINAL/TERMINALS ON OPPOSITE SURFACES
power_rating150.0 WATTS AVERAGE AND 10.0 KILOWATTS PEAK
bore_diameter1.5000 INCHES NOMINAL IN
overall_width3.060 INCHES NOMINAL IN
alignment_typeRIGID
overall_height3.060 INCHES NOMINAL IN
overall_length6.890 INCHES NOMINAL IN
frequency_range0.000 HERTZ MINIMUM AND 1.500 GIGAHERTZ MAXIMUM
mounting_methodTHREADED HOLE(S)
special_featuresFEMALE CONTACT SURFACES GOLD PLATED
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
NSN3110-00-198-1765
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 40-6-34 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 3.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER1.5000 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER3.5000 INCHES NOMINAL IN
OVERALL WIDTH2.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
14196Interchangeable
interchangeable cross-reference
interchangeable
V920-4Interchangeable
interchangeable cross-reference
interchangeable
301SH192Interchangeable
interchangeable cross-reference
interchangeable
8476Interchangeable
interchangeable cross-reference
interchangeable
333C471Q20Interchangeable
interchangeable cross-reference
interchangeable
10A4600/10A4656SXBHBECX-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 40-6-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40-6-34?
40-6-34 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Sandberg.
What parts can replace 40-6-34?
There are 14 known substitutes for 40-6-34: 14196, V920-4, 301SH192 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 40-6-34?
40-6-34 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40-6-34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026