PartsTable
Technical Data Sheet
PartsTable / MRO / 8476
8476 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include phase: SINGLE, material: STEEL, nut_style: HEXAGON, body_style: CYLINDRICAL BUSHING MOUNTED, nut_height: 0.375 INCHES NOMINAL IN, teeth_type: SPUR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 8476
NSN: 3110-00-198-1765
FSC: 3110
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
phaseSINGLE
materialSTEEL
nut_styleHEXAGON
body_styleCYLINDRICAL BUSHING MOUNTED
nut_height0.375 INCHES NOMINAL IN
teeth_typeSPUR
tooth_formSTANDARD
body_length0.948 INCHES NOMINAL IN
design_typeTOOL POST
shaft_styleROUND, SLOTTED
current_typeAC OR DC
shaft_length0.620 INCHES NOMINAL IN
NSN3110-00-198-1765
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 8476 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 3.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER1.5000 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER3.5000 INCHES NOMINAL IN
OVERALL WIDTH2.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
14196Interchangeable
interchangeable cross-reference
interchangeable
V920-4Interchangeable
interchangeable cross-reference
interchangeable
301SH192Interchangeable
interchangeable cross-reference
interchangeable
8476Interchangeable
interchangeable cross-reference
interchangeable
333C471Q20Interchangeable
interchangeable cross-reference
interchangeable
10A4600/10A4656SXBHBECX-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8476?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8476?
8476 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 8476?
There are 14 known substitutes for 8476: 14196, V920-4, 301SH192 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8476?
8476 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8476

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026