PartsTable
Technical Data Sheet
PartsTable / O-RING / 4-2604-40A
4-2604-40A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include center_hole_diameter: 1.719 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-486-1736, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4-2604-40A
NSN: 5331-01-486-1736
FSC: 5331 — O-RING
CAGE: FA3W9 — SAFRAN AEROSYSTEMS EX SAFRAN AEROSYSTEMS FLUID (FRA)
SPECIFICATIONS
center_hole_diameter1.719 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-01-486-1736
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4-2604-40A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.719 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.719 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AS568-224Interchangeable
interchangeable cross-reference
interchangeable
8215931Interchangeable
interchangeable cross-reference
interchangeable
S8-2Interchangeable
interchangeable cross-reference
interchangeable
130201Interchangeable
interchangeable cross-reference
interchangeable
AN6230-2Interchangeable
interchangeable cross-reference
interchangeable
AS568-224MILR27 65BUNANInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4-2604-40A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4-2604-40A?
4-2604-40A is a O-RING.
What parts can replace 4-2604-40A?
There are 8 known substitutes for 4-2604-40A: AS568-224, 8215931, S8-2 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4-2604-40A?
4-2604-40A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-486-1736. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4-2604-40A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026