PartsTable
Technical Data Sheet
PartsTable / O-RING / AN6230-2
AN6230-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN, center_hole_diameter: 1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: ARMORED MULTI-PURPOSE VEHICLE (AMPV). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-620-5700, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN6230-2
NSN: 5331-00-620-5700
FSC: 5331 — O-RING
CAGE: 81168 — STROHMEYER, JULIE A. DBA JULIE A. STROHMEYER (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
center_hole_diameter1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
NSN5331-00-620-5700
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN6230-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 2.012 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.719 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER2.012 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.719 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
AS568-224Interchangeable
interchangeable cross-reference
interchangeable
8215931Interchangeable
interchangeable cross-reference
interchangeable
S-82Interchangeable
interchangeable cross-reference
interchangeable
A-A-2124-3Interchangeable
interchangeable cross-reference
interchangeable
WW-D-1991Interchangeable
interchangeable cross-reference
interchangeable
2156239Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN6230-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN6230-2?
AN6230-2 is a O-RING.
What parts can replace AN6230-2?
There are 24 known substitutes for AN6230-2: AS568-224, 8215931, S-82 and 21 more. Substitute compatibility should be verified for your specific system.
Is AN6230-2 still available?
AN6230-2 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN6230-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026