PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3852984
3852984 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.594 INCHES NOMINAL IN, temp_rating: 300.0 CELSIUS DEGC, outside_diameter: 2.816 INCHES NOMINAL IN, surface_treatment: CADMIUM CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-904-2528, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3852984
NSN: 5330-00-904-2528
FSC: 5330
CAGE: 11862 — GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.594 INCHES NOMINAL IN
temp_rating300.0 CELSIUS DEGC
outside_diameter2.816 INCHES NOMINAL IN
surface_treatmentCADMIUM CASE
housing_bore_diameter2.812 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter1.739 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-904-2528
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3852984 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 300.0 CELSIUS DEGC
•
ACCOMMODATED SHAFT DIAMETER: 1.739 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
OUTSIDE DIAMETER: 2.816 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
MATERIAL: STEEL CASE
•
SURFACE TREATMENT: CADMIUM CASE
•
SEAL WIDTH: 0.594 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING300.0 CELSIUS DEGC
ACCOMMODATED SHAFT DIAMETER1.739 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
OUTSIDE DIAMETER2.816 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR-OPPOSED
MATERIALSTEEL CASE
SURFACE TREATMENTCADMIUM CASE
SEAL WIDTH0.594 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.812 INCHES NOMINAL IN
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
10963Interchangeable
interchangeable cross-reference
interchangeable
10389Interchangeable
interchangeable cross-reference
interchangeable
17190Interchangeable
interchangeable cross-reference
interchangeable
7435-98DInterchangeable
interchangeable cross-reference
interchangeable
87Interchangeable
interchangeable cross-reference
interchangeable
119294Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3852984?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3852984?
3852984 is a SEAL,PLAIN ENCASED.
What parts can replace 3852984?
There are 17 known substitutes for 3852984: 10963, 10389, 17190 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3852984?
3852984 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-904-2528. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3852984

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026