PartsTable
Technical Data Sheet
PartsTable / MRO / 10389
10389 ✓ Verified by PartsTable
Ugreen · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include phase: SINGLE, material: STEEL CORROSION RESISTING AND ALUMINUM ALLOY 6061, bore_type: PLAIN STRAIGHT, body_style: W/THD BUSHING MTG, TERMINALS ON OPPOSITE END, body_width: 2.562 INCHES NOMINAL IN, body_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-092-6234, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10389
NSN: 5315-00-092-6234
FSC: 5315
CAGE: 11599 — TRIUMPH ENGINE CONTROL SYSTEMS LLC (USA)
SPECIFICATIONS
phaseSINGLE
materialSTEEL CORROSION RESISTING AND ALUMINUM ALLOY 6061
bore_typePLAIN STRAIGHT
body_styleW/THD BUSHING MTG, TERMINALS ON OPPOSITE END
body_width2.562 INCHES NOMINAL IN
body_length0.625 INCHES NOMINAL IN
current_typeAC
overall_width16.960 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeHERMETICALLY SEALED
overall_height6.620 INCHES NOMINAL IN
voltage_rating120.0 VOLTS NOMINAL
NSN5315-00-092-6234
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10389 · Ugreen ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 10.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
PIN OVERALL DIAMETER: 0.1300 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5010 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP B1113 OR STEEL COMP 1112 OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
FIRST END STYLE: CHAMFERED
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE10.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
PIN OVERALL DIAMETER0.1300 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5010 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP B1113 OR STEEL COMP 1112 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
FIRST END STYLECHAMFERED
SECOND END STYLESQUARE
PIN OVERALL LENGTH0.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
1051-2Interchangeable
interchangeable cross-reference
interchangeable
SM-C-933880Interchangeable
interchangeable cross-reference
interchangeable
10389Interchangeable
interchangeable cross-reference
interchangeable
10963Interchangeable
interchangeable cross-reference
interchangeable
17190Interchangeable
interchangeable cross-reference
interchangeable
52405Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10389?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10389?
10389 is a CAPACITOR,FIXED,CERAMIC DIELECTR manufactured by Ugreen. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10389?
There are 17 known substitutes for 10389: 1051-2, SM-C-933880, 10389 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10389?
10389 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-092-6234. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10389

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026