PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3796564
3796564 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: FLANGED, seal_width: 0.688 INCHES NOMINAL IN, outside_diameter: 5.506 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 5.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-927-0028, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3796564
NSN: 5330-00-927-0028
FSC: 5330
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleFLANGED
seal_width0.688 INCHES NOMINAL IN
outside_diameter5.506 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter5.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter4.000 INCHES NOMINAL IN
NSN5330-00-927-0028
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3796564 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.688 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT DIAMETER: 4.000 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 5.500 INCHES NOMINAL IN
•
CASE STYLE: FLANGED
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.688 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER4.000 INCHES NOMINAL IN
HOUSING BORE DIAMETER5.500 INCHES NOMINAL IN
CASE STYLEFLANGED
OUTSIDE DIAMETER5.506 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
2058104Interchangeable
interchangeable cross-reference
interchangeable
01T2078Interchangeable
interchangeable cross-reference
interchangeable
6560Interchangeable
interchangeable cross-reference
interchangeable
040713Interchangeable
interchangeable cross-reference
interchangeable
3314258Interchangeable
interchangeable cross-reference
interchangeable
40360Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3796564?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3796564?
3796564 is a SEAL,PLAIN ENCASED.
What parts can replace 3796564?
There are 8 known substitutes for 3796564: 2058104, 01T2078, 6560 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3796564?
3796564 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-927-0028. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3796564

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026