PartsTable
Technical Data Sheet
6560 ✓ Verified by PartsTable
Multibrackets · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The all new M OLED Wallmount Tilt is designed to perfectly fit the new ultra thin OLED TV´s by LG*. Enhance your OLED installation with the easy to install M OLED Wallmount Tilt. Adjust and correctly set your TV position with the wall mount kit and hang your TV very snug to wall.

The unique Fingertip tilt allows for easy TV adjustments, without tools. The mount tilts your TV for easy cable access or to reduce glare. When installed the TV can slide from side-to-side for perfect positioning on the wall.

Easy release your TV via safety straps well hidden behind the TV with smart magnets.<br><br>M OLED Wallmount Tilt  is about XX mm thin. The M OLED Wallmount Tilt uses only the very highest metal quality to keep its thin profile and make it match the high end TV it supports. This makes the wall mount construction super strong and makes it is tested to withhold many times the weight of the QLED screens it was aimed for.<br><br>Available in black it matches most LG OLED´s perfectly.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6625-01-367-9482, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 6560
NSN: 6625-01-367-9482
FSC: 6625
CAGE: 3G310 — GULF CALIBRATION SERVICES INC (USA)
SPECIFICATIONS
depth1.800 INCHES NOMINAL IN
width3.800 INCHES NOMINAL IN
height5.000 INCHES NOMINAL IN
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE
tube_typeTRANSMIT-RECEIVE
face_width0.493 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
seat_angle42.0 DEGREES FIRST END
thread_class3A EXTERNAL A
cell_quantity6
overall_depth3.500 INCHES NOMINAL IN
overall_width18.000 INCHES NOMINAL IN
thread_length0.312 INCHES NOMINAL EXTERNAL IN
NSN6625-01-367-9482
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Multibrackets RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN 6560 MFR Multibrackets RESISTOR,VARIABLE,NONW
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESFRONT PANEL CONTROLS WITH REAR PANEL IEEE-488 INTERFACE: GPIB BUS ADDRESS SELECTABLE ON REAR: DISPLAY INDICATIONS ARE ON A 16 DIGIT DISPLAY. INDICATIONS ARE CAL MODE,2 OR 4 TERMINAL,SRQ AND LISTEN. ALSO HAS 3 INTERFACES,CHART RECORDER,RS232 AND CURRENT LOOP RESISTANCE VALUES ARE FROM 0 OHMS TO 100M OHMS AND CURRENT OUTPUT IS FROM 500 MA TO .005MA RESPECTIVLY: VOLTAGE REQUIREMENTS: 100,120,220 OR 240 P/M 10PCT. 50/60 HZ. WEIGHT 25LBS LBS
OVERALL LENGTH17.400 INCHES NOMINAL IN
OVERALL DEPTH3.500 INCHES NOMINAL IN
OVERALL WIDTH18.000 INCHES NOMINAL IN
SPECIAL FEATURESFRONT PANEL CONTROLS WITH REAR PANEL IEEE-488 INTERFACE: GPIB BUS ADDRESS SELECTABLE ON REAR: DISPLAY INDICATIONS ARE ON A 16 DIGIT DISPLAY. INDICATIONS ARE CAL MODE,2 OR 4 TERMINAL,SRQ AND LISTEN. ALSO HAS 3 INTERFACES,CHART RECORDER,RS232 AND CURRENT LOOP RESISTANCE VALUES ARE FROM 0 OHMS TO 100M OHMS AND CURRENT OUTPUT IS FROM 500 MA TO .005MA RESPECTIVLY: VOLTAGE REQUIREMENTS: 100,120,220 OR 240 P/M 10PCT. 50/60 HZ. WEIGHT 25LBS LBS
OVERALL LENGTH17.400 INCHES NOMINAL IN
OVERALL DEPTH3.500 INCHES NOMINAL IN
OVERALL WIDTH18.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
65/60Upgraded Successor
successor cross-reference
successor
65-60Upgraded Successor
successor cross-reference
successor
5006624-1Interchangeable
interchangeable cross-reference
interchangeable
2058104Interchangeable
interchangeable cross-reference
interchangeable
01T2078Interchangeable
interchangeable cross-reference
interchangeable
A6560Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 6560?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6560?
6560 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What parts can replace 6560?
There are 12 known substitutes for 6560: 65/60, 65-60, 5006624-1 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6560?
6560 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6625-01-367-9482. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6560