PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 364001 NON-ASBESTOS
364001 NON-ASBESTOS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.960 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, special_features: MATERIAL NON-ASBESTOS, style_designator: NON-CIRCULAR, aperture_diameter: 0.344 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-393-9080, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
364001 NON-ASBESTOS
NSN: 5330-01-393-9080
FSC: 5330
CAGE: 65702 — PRECISION AIRMOTIVE LLC DBA PRECISION AIRMOTIVE (USA)
SPECIFICATIONS
hole_diameter0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.960 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
special_featuresMATERIAL NON-ASBESTOS
style_designatorNON-CIRCULAR
aperture_diameter0.344 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.250 INCHES NOMINAL IN
cross-sectional_thickness0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
outside_edge_to_bolt_hole_center_distance_along_width0.152 INCHES NOMINAL IN
NSN5330-01-393-9080
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 364001 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 4
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESMATERIAL NON-ASBESTOS
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
HOLE DIAMETER0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY4
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OVERALL WIDTH0.960 INCHES NOMINAL IN
OVERALL LENGTH1.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
364001Interchangeable
interchangeable cross-reference
interchangeable
7S4994Interchangeable
interchangeable cross-reference
interchangeable
14Z4D07Interchangeable
interchangeable cross-reference
interchangeable
0102-9001Interchangeable
interchangeable cross-reference
interchangeable
HC-25/UInterchangeable
interchangeable cross-reference
interchangeable
MIL-H-10056/11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 364001 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 364001 NON-ASBESTOS?
364001 NON-ASBESTOS is a GASKET.
What parts can replace 364001 NON-ASBESTOS?
There are 6 known substitutes for 364001 NON-ASBESTOS: 364001, 7S4994, 14Z4D07 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 364001 NON-ASBESTOS?
364001 NON-ASBESTOS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-393-9080. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 364001 NON-ASBESTOS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026