PartsTable / COMPONENT / 364001
364001
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAP ASSEMBLY,PROTECTIVE,MUFFLER-. Key specifications include material: COPPER ALLOY, hole_diameter: 0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.960 INCHES NOMINAL IN, overall_length: 1.000 INCHES NOMINAL IN, special_features: MATERIAL NON-ASBESTOS, style_designator: NON-CIRCULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-037-9351, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
364001
NSN: 5330-00-037-9351 FSC: 5330 CAGE: 3VPW3 — PRECISION ENGINES LLC (USA)
SPECIFICATIONS
material COPPER ALLOY hole_diameter 0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 0.960 INCHES NOMINAL IN overall_length 1.000 INCHES NOMINAL IN special_features MATERIAL NON-ASBESTOS style_designator NON-CIRCULAR aperture_diameter 0.344 INCHES NOMINAL IN bolt_hole_quantity 4 outside_corner_radius 0.250 INCHES NOMINAL IN end_item_identification CARRIER M548E1,DUFF-NORTON CO INC cross-sectional_thickness 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION NSN 5330-00-037-9351
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 364001
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• APERTURE DIAMETER: 0.344 INCHES NOMINAL IN
• MATERIAL: ASBESTOS AND RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
• CROSS-SECTIONAL THICKNESS: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
• CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• STYLE DESIGNATOR: NON-CIRCULAR
• HOLE DIAMETER: 0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.152 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER 0.344 INCHES NOMINAL IN MATERIAL ASBESTOS AND RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL CROSS-SECTIONAL THICKNESS 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 0.656 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN STYLE DESIGNATOR NON-CIRCULAR HOLE DIAMETER 0.203 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN OVERALL LENGTH 1.000 INCHES NOMINAL IN OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH 0.152 INCHES NOMINAL IN CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH 0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
7S4994 Interchangeable interchangeable cross-reference
interchangeable
14Z4D07 Interchangeable interchangeable cross-reference
interchangeable
0102-9001 Interchangeable interchangeable cross-reference
interchangeable
HC-25/U Interchangeable interchangeable cross-reference
interchangeable
MIL-H-10056/11 Interchangeable interchangeable cross-reference
interchangeable
364001 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 364001?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 364001?
364001 is a CAP ASSEMBLY,PROTECTIVE,MUFFLER-.
What parts can replace 364001?
There are 7 known substitutes for 364001: 7S4994, 14Z4D07, 0102-9001 and 4 more. Substitute compatibility should be verified for your specific system.
Is 364001 still available?
364001 is currently cancelled.