PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 36-1-4-4DN
36-1-4-4DN ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN, outside_diameter: 0.466 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: NICKEL OVERALL, material_thickness: 0.022 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-568-8597, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
36-1-4-4DN
NSN: 5310-00-568-8597
FSC: 5310
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
outside_diameter0.466 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentNICKEL OVERALL
material_thickness0.022 INCHES NOMINAL IN
NSN5310-00-568-8597
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 36-1-4-4DN · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: NICKEL OVERALL
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.466 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTNICKEL OVERALL
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
OUTSIDE DIAMETER0.466 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
MS35333-108Interchangeable
interchangeable cross-reference
interchangeable
373-3050-000Interchangeable
interchangeable cross-reference
interchangeable
98175-310Interchangeable
interchangeable cross-reference
interchangeable
M39014101-1415Interchangeable
interchangeable cross-reference
interchangeable
UK50-103Interchangeable
interchangeable cross-reference
interchangeable
6240001558707Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 36-1-4-4DN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 36-1-4-4DN?
36-1-4-4DN is a WASHER,LOCK.
What parts can replace 36-1-4-4DN?
There are 25 known substitutes for 36-1-4-4DN: MS35333-108, 373-3050-000, 98175-310 and 22 more. Substitute compatibility should be verified for your specific system.
Is 36-1-4-4DN still available?
36-1-4-4DN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 36-1-4-4DN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026