PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 352250025237
352250025237 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include width: 0.562 INCHES NOMINAL IN, material: STEEL OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.140 INCHES NOMINAL IN, overall_width: 1.250 INCHES NOMINAL IN, overall_height: 1.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-860-3862, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
352250025237
NSN: 5340-00-860-3862
FSC: 5340
CAGE: H0203 — THALES NEDERLAND (NLD)
SPECIFICATIONS
width0.562 INCHES NOMINAL IN
materialSTEEL OVERALL
design_typeLOOP ENGAGING
hole_diameter0.140 INCHES NOMINAL IN
hole_quantity2
overall_width1.250 INCHES NOMINAL IN
overall_height1.000 INCHES NOMINAL IN
overall_length0.875 INCHES NOMINAL IN
operation_methodLEVER HANDLE
style_designatorLEVER WITH SPRING
surface_treatmentZINC OVERALL
catch_strike_styleMORTISE
NSN5340-00-860-3862
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 352250025237 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
•
CATCH STRIKE STYLE: MORTISE
•
HOLE QUANTITY: 2
•
OPERATION METHOD: LEVER HANDLE
•
WIDTH: 0.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SURFACE TREATMENTZINC OVERALL
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH0.875 INCHES NOMINAL IN
HOLE QUANTITY2
OPERATION METHODLEVER HANDLE
OVERALL WIDTH1.250 INCHES NOMINAL IN
WIDTH0.562 INCHES NOMINAL IN
SURFACE HOLE QUANTITY2
SURFACE HOLE DIAMETER0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
A63-2002-746Upgraded Successor
successor cross-reference
successor
S0B62565Upgraded Successor
successor cross-reference
successor
677671Upgraded Successor
successor cross-reference
successor
SC-D-20648Upgraded Successor
successor cross-reference
successor
5340008603862Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 352250025237?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 352250025237?
352250025237 is a CATCH,CLAMPING.
What parts can replace 352250025237?
There are 5 known substitutes for 352250025237: A63-2002-746, S0B62565, 677671 and 2 more. Substitute compatibility should be verified for your specific system.
Is 352250025237 still available?
352250025237 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 352250025237

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026