PartsTable
Technical Data Sheet
Download PDF

S0B62565 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

S0B62565: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.140 INCHES NOMINAL IN, overall_width: 1.437 INCHES NOMINAL IN, overall_height: 0.500 INCHES NOMINAL IN, overall_length: 2.265 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-205-5159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S0B62565
NSN: 5340-00-205-5159
FSC: 5340 — Hardware, Commercial
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
materialSTEEL OVERALL
design_typeLOOP ENGAGING
hole_diameter0.140 INCHES NOMINAL IN
hole_quantity2
overall_width1.437 INCHES NOMINAL IN
overall_height0.500 INCHES NOMINAL IN
overall_length2.265 INCHES NOMINAL IN
operation_methodLEVER
style_designatorLEVER WITH SPRING
surface_treatmentCADMIUM AND CHROMATE OVERALL
engaging_surface_width0.531 INCHES NOMINAL IN
engaging_surface_thickness0.090 INCHES NOMINAL IN
NSN5340-00-205-5159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: S0B62565 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: LOOP ENGAGING
•
ENGAGING SURFACE WIDTH: 0.531 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVER WITH SPRING
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
ENGAGING SURFACE THICKNESS: 0.090 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.500 INCHES NOMINAL IN
DESIGN TYPELOOP ENGAGING
ENGAGING SURFACE WIDTH0.531 INCHES NOMINAL IN
STYLE DESIGNATORLEVER WITH SPRING
OVERALL LENGTH2.265 INCHES NOMINAL IN
OVERALL WIDTH1.437 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
ENGAGING SURFACE THICKNESS0.090 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 7
A63-2002-746Reference document
Same NSN cross-reference
Reference document — Secondary reference
677671Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
255T1014Reference document
Same NSN cross-reference
Reference document — Secondary reference
A232620Reference document
Same NSN cross-reference
Reference document — Secondary reference
SCB62565Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SCD20648ANDSCB20651PART2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy S0B62565?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S0B62565?
S0B62565 is a CATCH,CLAMPING.
What parts can replace S0B62565?
There are 7 known substitutes for S0B62565: A63-2002-746, 677671, 255T1014 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S0B62565?
S0B62565 is cataloged in the U.S. Government catalog under NSN 5340-00-205-5159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S0B62565

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.