The Lathe,engine, cataloged under National Stock Number 3416-01-034-1257, is classified within Federal Supply Class 3416 (Lathes) of the Metalworking Machinery (continued) group. The manufacturer of record is Caro, Inc. Dba South Bend Lathe. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3416-01-034-1257 |
| Primary Part Number | 26-MIL |
| Item Name | Lathe,engine |
| FSC / FSG | 3416 / 34 — Lathes |
| Manufacturer | Caro, Inc. Dba South Bend Lathe |
| Status | ACTIVE |
| Phase | THREE |
| Swing Over Cross Slide | 18.000 INCHES NOMINAL IN |
| Frequency in Hertz | 50.0 AND 60.0 |
| Voltage in Volts | 220.0 AND 440.0 |
| Rated Swing | 25.000 INCHES NOMINAL IN |
| Hole Diameter Through Spindle | 3.000 INCHES MINIMUM IN |
| Accessory Components and Quantity | 1 STOP,CARRIAGE,MICROMETER,1 STOP,THREAD CUTTING,1 INDICATOR,THREAD,1 TAPER ATTACHMENT,1 SET GEARS,1BAG,1 COVER,CANVAS,1 SET WRENCHES,1 WRENCH SPANNER,1 WRENCH,TOOL POST,1 ADAPTER HEADSTOCK,1 ADAPTER,TAILSTOCK,1 CHUCK,3-JAW UNIVERSAL,1 CHUCK4 JAW INDEPENDENT,1 CHUCK,COLLET,1 SET COLLETS,1 CHUCK DRILL,1 FACEPLATE,12 INCH DIAMETER,1 FACEPLATE,24 INCH DIAMETER,2 LATHE CENTERS,1 SET DOG LATHE,1 DOG LATHE,1 STEADYREST,3 SOCKETS,TAPER SHANK TOOL,1 SET DRIFT,DRILL,1 SET TOOL POST,LATHE,1 KNURLING TOOL,2 HOLDERS,3/8 INCH SQUARECUTTER BIT RIGHT AND LEFT HAND TURNING,2 HOLDERS,1/8 X 7/8 INCH CUT-OFF BLADE,RIGHT AND LEFT HAND OFFSET,1 HOLDER,BORING BAR,1 BORING BAR,ROUND,1/2 INCH DIAMETER,1 BORING BAR ROUND,3/4 INCH DIAMETER,1 BORING BAR,ROUND,1-1/8 INCH DIAMETER,3 KNURLING SETS IN |
| Electric Motor Quantity | 1 |
| Spindle Speed Range in RPM | +30.0 TO 1200.0 |
| Electric Motor Horsepower Rating | 5.000 |
| Actual Swing Over Bed | 25.000 INCHES NOMINAL IN |
| Spindle Speed Quantity | 12 |
| Center to Center Distance | 30.000 INCHES NOMINAL IN |
| Mounting Type | BENCH OR FLOOR |
| Performance Type | LIGHT DUTY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 26-MIL PRIMARY | Caro, Inc. Dba South Bend Lathe (USA) |
| Reference | Meaning |
|---|---|
| 3416-2112-5030 | 6/9 Informative reference only U.S. Government activity |
| 26-MIL | 5/9 Secondary reference Omatech Service Ltd |
NSN 3416-01-034-1257 is a Lathe,engine, manufactured by Caro, Inc. Dba South Bend Lathe, classified under FSC 3416, Lathes. Status: active.
NSN 3416-01-034-1257 has 1 manufacturer part number on file: 26-MIL (Caro, Inc. Dba South Bend Lathe).
Key specifications for 26-MIL: Phase: THREE; Swing Over Cross Slide: 18.000 INCHES NOMINAL IN; Frequency in Hertz: 50.0 AND 60.0; Voltage in Volts: 220.0 AND 440.0. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.