26-MIL — LATHE,ENGINE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

26-MIL: LATHE,ENGINE.

The LATHE,ENGINE is a the manufacturer industrial component. Key specifications include phase: THREE, rated_swing: 25.000 INCHES NOMINAL IN, mounting_type: BENCH OR FLOOR, performance_type: LIGHT DUTY, voltage_in_volts: 220.0 AND 440.0, frequency_in_hertz: 50.0 AND 60.0. This part is cataloged in the U.S.

Government catalog under NSN 3416-01-034-1257, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

26-MIL

NSN: 3416-01-034-1257
FSC: 3416 — Lathes
CAGE: 55985 — CARO, INC. DBA SOUTH BEND LATHE (USA)

SPECIFICATIONS

phase	THREE
rated_swing	25.000 INCHES NOMINAL IN
mounting_type	BENCH OR FLOOR
performance_type	LIGHT DUTY
voltage_in_volts	220.0 AND 440.0
frequency_in_hertz	50.0 AND 60.0
actual_swing_over_bed	25.000 INCHES NOMINAL IN
spindle_speed_quantity	12
swing_over_cross_slide	18.000 INCHES NOMINAL IN
electric_motor_quantity	1
center_to_center_distance	30.000 INCHES NOMINAL IN
spindle_speed_range_in_rpm	+30.0 TO 1200.0
NSN	3416-01-034-1257

COMPONENT DIAGRAM

KEY FEATURES

•

PHASE: THREE

•

SWING OVER CROSS SLIDE: 18.000 INCHES NOMINAL IN

•

FREQUENCY IN HERTZ: 50.0 AND 60.0

•

VOLTAGE IN VOLTS: 220.0 AND 440.0

•

RATED SWING: 25.000 INCHES NOMINAL IN

•

HOLE DIAMETER THROUGH SPINDLE: 3.000 INCHES MINIMUM IN

•

ACCESSORY COMPONENTS AND QUANTITY: 1 STOP,CARRIAGE,MICROMETER,1 STOP,THREAD CUTTING,1 INDICATOR,THREAD,1 TAPER ATTACHMENT,1 SET GEARS,1BAG,1 COVER,CANVAS,1 SET WRENCHES,1 WRENCH SPANNER,1 WRENCH,TOOL POST,1 ADAPTER HEADSTOCK,1 ADAPTER,TAILSTOCK,1 CHUCK,3-JAW UNIVERSAL,1 CHUCK4 JAW INDEPENDENT,1 CHUCK,COLLET,1 SET COLLETS,1 CHUCK DRILL,1 FACEPLATE,12 INCH DIAMETER,1 FACEPLATE,24 INCH DIAMETER,2 LATHE CENTERS,1 SET DOG LATHE,1 DOG LATHE,1 STEADYREST,3 SOCKETS,TAPER SHANK TOOL,1 SET DRIFT,DRILL,1 SET TOOL POST,LATHE,1 KNURLING TOOL,2 HOLDERS,3/8 INCH SQUARECUTTER BIT RIGHT AND LEFT HAND TURNING,2 HOLDERS,1/8 X 7/8 INCH CUT-OFF BLADE,RIGHT AND LEFT HAND OFFSET,1 HOLDER,BORING BAR,1 BORING BAR,ROUND,1/2 INCH DIAMETER,1 BORING BAR ROUND,3/4 INCH DIAMETER,1 BORING BAR,ROUND,1-1/8 INCH DIAMETER,3 KNURLING SETS IN

•

ELECTRIC MOTOR QUANTITY: 1

TECHNICAL CHARACTERISTICS

PHASE	THREE
SWING OVER CROSS SLIDE	18.000 INCHES NOMINAL IN
FREQUENCY IN HERTZ	50.0 AND 60.0
VOLTAGE IN VOLTS	220.0 AND 440.0
RATED SWING	25.000 INCHES NOMINAL IN
HOLE DIAMETER THROUGH SPINDLE	3.000 INCHES MINIMUM IN
ACCESSORY COMPONENTS AND QUANTITY	1 STOP,CARRIAGE,MICROMETER,1 STOP,THREAD CUTTING,1 INDICATOR,THREAD,1 TAPER ATTACHMENT,1 SET GEARS,1BAG,1 COVER,CANVAS,1 SET WRENCHES,1 WRENCH SPANNER,1 WRENCH,TOOL POST,1 ADAPTER HEADSTOCK,1 ADAPTER,TAILSTOCK,1 CHUCK,3-JAW UNIVERSAL,1 CHUCK4 JAW INDEPENDENT,1 CHUCK,COLLET,1 SET COLLETS,1 CHUCK DRILL,1 FACEPLATE,12 INCH DIAMETER,1 FACEPLATE,24 INCH DIAMETER,2 LATHE CENTERS,1 SET DOG LATHE,1 DOG LATHE,1 STEADYREST,3 SOCKETS,TAPER SHANK TOOL,1 SET DRIFT,DRILL,1 SET TOOL POST,LATHE,1 KNURLING TOOL,2 HOLDERS,3/8 INCH SQUARECUTTER BIT RIGHT AND LEFT HAND TURNING,2 HOLDERS,1/8 X 7/8 INCH CUT-OFF BLADE,RIGHT AND LEFT HAND OFFSET,1 HOLDER,BORING BAR,1 BORING BAR,ROUND,1/2 INCH DIAMETER,1 BORING BAR ROUND,3/4 INCH DIAMETER,1 BORING BAR,ROUND,1-1/8 INCH DIAMETER,3 KNURLING SETS IN
ELECTRIC MOTOR QUANTITY	1
SPINDLE SPEED RANGE IN RPM	+30.0 TO 1200.0
ELECTRIC MOTOR HORSEPOWER RATING	5.000

OTHER ITEMS IN FSC 3416 — Lathes

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3416-00-003-4537 3416-00-004-3822 3416-00-022-8442 3416-00-031-6731 3416-00-034-8431 3416-00-042-9513 3416-00-043-4210 3416-00-051-7764

SUBSTITUTES & CROSS-REFERENCES 1

3416-2112-5030Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 26-MIL?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 26-MIL?

26-MIL is a LATHE,ENGINE.

What parts can replace 26-MIL?

There is 1 known substitute for 26-MIL: 3416-2112-5030. Substitute compatibility should be verified for your specific system.

What is the NSN for 26-MIL?

26-MIL is cataloged in the U.S. Government catalog under NSN 3416-01-034-1257. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

26-MIL — LATHE,ENGINE

Request a Quote — 26-MIL