PartsTable
Technical Data Sheet
PartsTable / O-RING / 195076
195076 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MOUNT,SIGHT is a the manufacturer industrial component. Key specifications include end_item_identification: MK47, part_name_assigned_by_controlling_agency: MOUNT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-833-1429, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
195076
NSN: 5331-00-833-1429
FSC: 5331 — O-RING
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
special_featuresMK47 FIRE CONTROL SYSTEM MOUNT: PROVIDES MOUNTING INTERFACE BETWEEN THE FIRE CONTROL SYSTEM AND MK107 MOUNT. WIDTH: 8.66 IN; HEIGHT: 8.66 IN; LENGTH: 25.78 IN; WEIGHT: 15.43 LB; LBS
end_item_identificationMK47
part_name_assigned_by_controlling_agencyMOUNT
NSN5331-00-833-1429
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 195076 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 2.256 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.040 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 160 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER2.256 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.040 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE160 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
P48026-137Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS28775Interchangeable
interchangeable cross-reference
interchangeable
MS28775-137Interchangeable
interchangeable cross-reference
interchangeable
V3D10075PC28Interchangeable
interchangeable cross-reference
interchangeable
ARP568-137MILP5 516-70DUR0Interchangeable
interchangeable cross-reference
interchangeable
332C8196-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 195076?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 195076?
195076 is a MOUNT,SIGHT.
What parts can replace 195076?
There are 13 known substitutes for 195076: P48026-137, SAE-AS28775, MS28775-137 and 10 more. Substitute compatibility should be verified for your specific system.
Is 195076 still available?
195076 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 195076

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026