PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 328410
328410 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICES,UNITIZED is a the manufacturer industrial component. Key specifications include capacity: 1.000 MILLILITERS, material: STEEL OVERALL, needle_hub: PROVIDED, scale_type: SINGLE, overall_width: 1.050 INCHES MAXIMUM IN, cannula_length: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-852-8497, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
328410
NSN: 3110-00-852-8497
FSC: 3110
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
capacity1.000 MILLILITERS
materialSTEEL OVERALL
needle_hubPROVIDED
scale_typeSINGLE
overall_width1.050 INCHES MAXIMUM IN
cannula_length0.500 INCHES NOMINAL IN
overall_height0.450 INCHES MAXIMUM IN
overall_length1.573 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
outside_diameter7.3750 INCHES NOMINAL IN
special_featuresNOT MORE THAN 1 UNIT DEAD SPACE; NEEDLE PERMANENTLY ATTACHED; 10 STRIPS OF 10 SYRINGES PER PACKAGE
style_designatorNORMAL ANGLE
NSN3110-00-852-8497
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 328410 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 7.3750 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER7.3750 INCHES NOMINAL IN
SPECIAL FEATURESDUTY CLASS LM SERIES
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL WIDTH0.9063 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
SD241Interchangeable
interchangeable cross-reference
interchangeable
XA97Interchangeable
interchangeable cross-reference
interchangeable
8410-27.5GAGEInterchangeable
interchangeable cross-reference
interchangeable
8881-501210Interchangeable
interchangeable cross-reference
interchangeable
BF329410Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 328410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 328410?
328410 is a SEMICONDUCTOR DEVICES,UNITIZED.
What parts can replace 328410?
There are 5 known substitutes for 328410: SD241, XA97, 8410-27.5GAGE and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 328410?
328410 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-852-8497. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 328410

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026