PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 32762-1
32762-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CIRCUIT CARD ASSEMBLY is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_diameter: 4.7236 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM IN, overall_width: 2.1747 INCHES MINIMUM AND 2.2047 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, special_features: FOUR SLOTS EQUALLY SPACED ON FACE,SPLIT INNER RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-963-1417, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
32762-1
NSN: 3110-00-963-1417
FSC: 3110
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_diameter4.7236 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM IN
overall_width2.1747 INCHES MINIMUM AND 2.2047 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
special_featuresFOUR SLOTS EQUALLY SPACED ON FACE,SPLIT INNER RING
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
overall_outside_diameter7.0856 INCHES MINIMUM AND 7.0866 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.1
lubrication_material_document_and_classificationMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-963-1417
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 32762-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY RETAINER
•
BORE DIAMETER: 4.7236 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 7.0856 INCHES MINIMUM AND 7.0866 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
•
RETAINER FABRICATION METHOD: MACHINED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY RETAINER
BORE DIAMETER4.7236 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER7.0856 INCHES MINIMUM AND 7.0866 INCHES MAXIMUM IN
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
RETAINER FABRICATION METHODMACHINED
MATERIALGREASE LUBRICATION
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONANGULAR
MATERIALSTEEL OUTER RING
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
32762Interchangeable
interchangeable cross-reference
interchangeable
A1912PC15Interchangeable
interchangeable cross-reference
interchangeable
34230Interchangeable
interchangeable cross-reference
interchangeable
A1911PC15Interchangeable
interchangeable cross-reference
interchangeable
TCR-802-MInterchangeable
interchangeable cross-reference
interchangeable
TC-43-MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 32762-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 32762-1?
32762-1 is a CIRCUIT CARD ASSEMBLY.
What parts can replace 32762-1?
There are 7 known substitutes for 32762-1: 32762, A1912PC15, 34230 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 32762-1?
32762-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-963-1417. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 32762-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026