<b>Extends VGA & Audio signals from one PC to 8 monitors at distances of up to 250m!</b><br><br>This powerful product allows VGA and audio signals to be transmitted to up to 8 different monitors over CAT5e or higher cables. It supports transmission distances of up to 250m for each of the connected displays. It is designed for use with our additional, compatible receiver units which are available in 150m and 250m variants to provide an easy method for extending the signals.
Local VGA and audio ports are provided to connect a nearby monitor and speakers.<br><br>- Allows up to 8 VGA displays to be connected to a single source at distances of up to 250m via CAT5e, UTP CAT5e Solid Core or higher cables (not included).<br>- Supports mono audio signal.<br>- Requires additional receiver units for each long distance monitor connection: 150m Receiver (Part No. 32764); 250m Receiver (Part No. 32765).<br>- Allows a nearby monitor and speakers to be connected for easy local monitoring.<br>- Support This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5307-00-145-4711, indicating validated use in U.S.
government and defense logistics supply chains.
| material | STEEL OUTER RING |
| bore_diameter | 4.7236 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM IN |
| overall_width | 2.1747 INCHES MINIMUM AND 2.2047 INCHES MAXIMUM IN |
| load_direction | ANGULAR |
| surface_finish | GROUND |
| special_features | FOUR SLOTS EQUALLY SPACED ON FACE,SPLIT INNER RING |
| style_designator | COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING |
| overall_outside_diameter | 7.0856 INCHES MINIMUM AND 7.0866 INCHES MAXIMUM IN |
| internal_fit-up_designation | STANDARD |
| retainer_fabrication_method | MACHINED |
| standard_tolerance_designation | ABEC NO.1 |
| lubrication_material_document_and_classification | MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE |
| NSN | 5307-00-145-4711 |
| THREAD SERIES DESIGNATOR | UNF STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD CLASS | 3A NUT THREAD A |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD LENGTH | 0.656 INCHES NOMINAL NUT THREAD IN |
| SPECIAL FEATURES | 0.109 IN. COTTER PIN HOLE DIA IN STUD END; 0.156 IN. DISTNACE FROM CENTER OF HOLE TO STUD END IN |
| NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 8740 |
| THREAD CLASS | 3A STUD THREAD A |