PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3249167
3249167 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.188 INCHES NOMINAL IN, material: STEEL, outside_diameter: 0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN, special_features: REFERENCE MANUAL NO. 37013-250, style_designator: CUP, surface_treatment: CADMIUM.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-354-1147, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3249167
NSN: 5340-00-354-1147
FSC: 5340
CAGE: 55380 — HATCH & KIRK, INC. (USA)
SPECIFICATIONS
height0.188 INCHES NOMINAL IN
materialSTEEL
outside_diameter0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
special_featuresREFERENCE MANUAL NO. 37013-250
style_designatorCUP
surface_treatmentCADMIUM
material_thickness0.037 INCHES NOMINAL IN
material_document_and_classificationAISI C1010 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-354-1147
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3249167 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI C1010 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL: STEEL
•
HEIGHT: 0.188 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CUP
•
SURFACE TREATMENT: CADMIUM
•
MATERIAL THICKNESS: 0.037 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAISI C1010 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL
HEIGHT0.188 INCHES NOMINAL IN
OUTSIDE DIAMETER0.748 INCHES MINIMUM AND 0.753 INCHES MAXIMUM IN
STYLE DESIGNATORCUP
SPECIAL FEATURESREFERENCE MANUAL NO. 37013-250
SURFACE TREATMENTCADMIUM
MATERIAL THICKNESS0.037 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
933617-109Upgraded Successor
successor cross-reference
successor
ES7073-109Upgraded Successor
successor cross-reference
successor
A45020-109Upgraded Successor
successor cross-reference
successor
CA5347Interchangeable
interchangeable cross-reference
interchangeable
C4369Interchangeable
interchangeable cross-reference
interchangeable
40357Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3249167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3249167?
3249167 is a PLUG,EXPANSION.
What parts can replace 3249167?
There are 15 known substitutes for 3249167: 933617-109, ES7073-109, A45020-109 and 12 more. Substitute compatibility should be verified for your specific system.
Is 3249167 still available?
3249167 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3249167

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026