PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 320600
320600 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include width: 6.750 INCHES NOMINAL IN, length: 10.125 INCHES NOMINAL IN, material: PLASTIC, pouch_face_type: FLAT, special_features: BEIGE, features_provided: DISPOSABLE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8306, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
320600
NSN: 3110-00-293-8306
FSC: 3110
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
width6.750 INCHES NOMINAL IN
length10.125 INCHES NOMINAL IN
materialPLASTIC
pouch_face_typeFLAT
special_featuresBEIGE
features_providedDISPOSABLE
unit_package_typeBOX
unit_package_quantity5
center_opening_diameter1.250 INCHES NOMINAL IN
NSN3110-00-293-8306
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 320600 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: ABEC NO. 7P
•
BORE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 170.00 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONABEC NO. 7P
BORE DIAMETER80.00 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER170.00 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
OVERALL WIDTH39.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
3HD819Interchangeable
interchangeable cross-reference
interchangeable
482163NInterchangeable
interchangeable cross-reference
interchangeable
2826106Interchangeable
interchangeable cross-reference
interchangeable
8611379-109Interchangeable
interchangeable cross-reference
interchangeable
13557Interchangeable
interchangeable cross-reference
interchangeable
3206Interchangeable
IBM V7000 600 GB 2.5-inch 10K HDD
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 320600?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 320600?
320600 is a BEARING,BALL,ANNULAR.
What parts can replace 320600?
There are 19 known substitutes for 320600: 3HD819, 482163N, 2826106 and 16 more. Substitute compatibility should be verified for your specific system.
Is 320600 still available?
320600 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 320600

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026