PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2826106
2826106 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: PLASTIC ACRYLIC SEALING ELEMENT, case_style: RECESSED, seal_width: 0.313 INCHES NOMINAL IN, temp_rating: 300.0 CELSIUS DEGC, outside_diameter: 1.987 INCHES NOMINAL IN, surface_treatment: CADMIUM CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-010-2415, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2826106
NSN: 5330-00-010-2415
FSC: 5330
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialPLASTIC ACRYLIC SEALING ELEMENT
case_styleRECESSED
seal_width0.313 INCHES NOMINAL IN
temp_rating300.0 CELSIUS DEGC
outside_diameter1.987 INCHES NOMINAL IN
surface_treatmentCADMIUM CASE
housing_bore_diameter1.983 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-010-2415
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2826106 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.987 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM CASE
•
HOUSING BORE DIAMETER: 1.983 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: PLASTIC ACRYLIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.987 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
SEAL WIDTH0.313 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM CASE
HOUSING BORE DIAMETER1.983 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
MATERIALPLASTIC ACRYLIC SEALING ELEMENT
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
TEMP RATING300.0 CELSIUS DEGC
CASE STYLERECESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
8611379-109Interchangeable
interchangeable cross-reference
interchangeable
13557Interchangeable
interchangeable cross-reference
interchangeable
11014596-6Interchangeable
interchangeable cross-reference
interchangeable
320158Interchangeable
interchangeable cross-reference
interchangeable
SK9355Interchangeable
interchangeable cross-reference
interchangeable
FG 557Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2826106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2826106?
2826106 is a SEAL,PLAIN ENCASED.
What parts can replace 2826106?
There are 11 known substitutes for 2826106: 8611379-109, 13557, 11014596-6 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2826106?
2826106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-010-2415. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2826106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026