The Bearing,ball,rod End, cataloged under National Stock Number 3110-01-543-3078, is classified within Federal Supply Class 3110 (No Item Name Available) of the Bearings group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 25 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-01-543-3078 |
| Primary Part Number | AS21153-5 |
| Item Name | Bearing,ball,rod End |
| FSC / FSG | 3110 / 31 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Material | STEEL COMP E52100 BALL |
| Material | STEEL COMP 4130 OUTER RACE |
| Style Designator | DOUBLE ROW, STAGGERED, BALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Surface Treatment | ZINC AND NICKEL OVERALL |
| Lubrication Material Document and Classification | MIL-PRF-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| Inner Ring Width | 0.4370 INCHES NOMINAL IN |
| Nominal Thread Size | 0.250 INCHES IN |
| Self-Alignment Angle | 10.00 DEGREES MINIMUM |
| Width Across Flats | 0.4380 INCHES NOMINAL IN |
| Alignment Type | SELF-ALIGNING |
| Shank Thread Length | 0.7500 INCHES NOMINAL IN |
| Self-Alignment Location | INTERNAL |
| Lubrication Material | GREASE |
| Thread Quantity Per Inch | 28 |
| Outer Ring Width | 0.3280 INCHES NOMINAL IN |
| Length From Bore Center to Shank End | 1.3750 INCHES NOMINAL IN |
| Bore Diameter | 0.1875 INCHES NOMINAL IN |
| Thread Class | 3B |
| Shank Diameter | 0.3750 INCHES NOMINAL IN |
| Shank Style | INTERNALLY THREADED W/HEXAGON END |
| Material | STEEL COMP E52100 INNER RACE |
| Thread Direction | RIGHT-HAND |
| Overall Outside Diameter | 0.7810 INCHES NOMINAL IN |
| Material | STEEL COMP 4130 ROD END BODY |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AS21153 | Society of Automotive Engineers Inc (USA) |
| AS21153-5 | Society of Automotive Engineers Inc (USA) |
| AS21153 | Sae International Dba Sae International (USA) |
| MS21153-5 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| AS21153-5 PRIMARY | Sae International Dba Sae International (USA) |
NSN 3110-01-543-3078 is a Bearing,ball,rod End, manufactured by Sae International Dba Sae International, classified under FSC 3110 (No Item Name Available). Status: active.
NSN 3110-01-543-3078 has 5 cross-referenced part numbers: AS21153 (Society of Automotive Engineers Inc), AS21153-5 (Society of Automotive Engineers Inc), AS21153 (Sae International Dba Sae International), MS21153-5 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), AS21153-5 (Sae International Dba Sae International).
There are 12 known substitutes for 3110-01-543-3078: 3110-00-173-5074, 3110-00-232-3179, 3110-00-232-3216 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for AS21153-5: Material: STEEL COMP E52100 BALL; Material: STEEL COMP 4130 OUTER RACE; Style Designator: DOUBLE ROW, STAGGERED, BALL; Thread Series Designator: UNIFIED NATIONAL JOINT FINE (UNJF). 27 total characteristics are documented in the Federal Logistics Information System.