The Bearing,ball,rod End, cataloged under National Stock Number 3110-00-232-3179, is classified within Federal Supply Class 3110 (No Item Name Available) of the Bearings group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 16 commercial cross-references from 9 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 3110-00-232-3179 |
| Primary Part Number | MS21153-1 |
| Item Name | Bearing,ball,rod End |
| FSC / FSG | 3110 / 31 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | CANCELLED |
| Overall Outside Diameter | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM IN |
| Shank Thread Length | 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM IN |
| Self-Alignment Location | INTERNAL |
| Length From Bore Center to Shank End | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM IN |
| Lubrication Material | GREASE |
| Outer Ring Width | 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM IN |
| Inner Ring Width | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN |
| Seal Quantity | 2 |
| Nominal Thread Size | 0.250 INCHES IN |
| Width Across Flats | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM IN |
| Bearing Seal Type | CONTACT |
| Self-Alignment Angle | 10.00 DEGREES NOMINAL |
| Thread Quantity Per Inch | 28 |
| Alignment Type | SELF-ALIGNING |
| Thread Direction | RIGHT-HAND |
| Shank Diameter | 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM ROD END BODY |
| Lubrication Material Document and Classification | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| Material | STEEL COMP E52100 BALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Material Document and Classification | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| Material Document and Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| Material | STEEL COMP 4130 SHAFT |
| Material Document and Classification | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| Thread Class | 3B |
| Style Designator | DOUBLE ROW, STAGGERED, BALL |
| Surface Treatment Document and Classification | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| Surface Treatment | CADMIUM OUTER RING |
| Material | STEEL COMP 4130 OUTER RING |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MS21153-1 | Society of Automotive Engineers Inc (USA) |
| REPB3N | Skf Usa Inc. (USA) |
| REPB3NFS428 | Timken Co Div the Timken Company (USA) |
| REPB3NFS464 | Roller Bearing Company of America, Inc. (USA) |
| AS21153 | Sae International Dba Sae International (USA) |
| 128HM10296-1 | Northrop Grumman Systems Corporation (USA) |
| REP3F4-1F | Roller Bearing Company of America, Inc. (USA) |
| REPB3NFS464 | Timken Co Div the Timken Company (USA) |
| REPB3NFS210 | Timken Co Div the Timken Company (USA) |
| MS21153-1 PRIMARY | Sae International Dba Sae International (USA) |
| MS21153-1 | New Hampshire Ball Bearings Inc Div Astro Division (USA) |
| AS21153 | Society of Automotive Engineers Inc (USA) |
| MS21153-1 | Rexnord Industries, Llc Div Aerosspace Bearing Operation (USA) |
| MS21153-1 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| REPB3NA4031 | Timken Co Div the Timken Company (USA) |
| 138HM10296-1 | Timken Co Div the Timken Company (USA) |
NSN 3110-00-232-3179 is a Bearing,ball,rod End, manufactured by Sae International Dba Sae International, classified under FSC 3110 (No Item Name Available). Status: cancelled.
NSN 3110-00-232-3179 has 16 cross-referenced part numbers: MS21153-1 (Society of Automotive Engineers Inc), REPB3N (Skf Usa Inc.), REPB3NFS428 (Timken Co Div the Timken Company), REPB3NFS464 (Roller Bearing Company of America, Inc.), AS21153 (Sae International Dba Sae International) and 11 more.
There are 12 known substitutes for 3110-00-232-3179: 3110-00-173-5074, 3110-00-232-3216, 3110-00-232-3245 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MS21153-1: Overall Outside Diameter: 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM IN; Shank Thread Length: 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM IN; Self-Alignment Location: INTERNAL; Length From Bore Center to Shank End: 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 3110-00-232-3179 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.