The Bearing,ball,duplex, cataloged under National Stock Number 3110-00-179-7323, is classified within Federal Supply Class 3110 (No Item Name Available) of the Bearings group. The primary manufacturer of record is Timken Co Div the Timken Company. Government technical data includes 28 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3110-00-179-7323 |
| Primary Part Number | AAMM213-3SMBRDTE7103 |
| Item Name | Bearing,ball,duplex |
| FSC / FSG | 3110 / 31 — No Item Name Available |
| Manufacturer | Timken Co Div the Timken Company |
| Status | ACTIVE |
| Internal Clearance | 0.0033 INCHES MINIMUM RADIAL AND 0.0043 INCHES MAXIMUM RADIAL IN |
| Standard Tolerance Designation | ABEC NO.7 |
| Internal Clearance | 0.0033 INCHES MINIMUM RADIAL AND 0.0043 INCHES MAXIMUM RADIAL IN |
| Material | STEEL INNER RING |
| Test Data Document | +6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Precious Material and Location | RETAINER SILVER |
| Precious Material | SILVER |
| Style Designator | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
| Test Data Document | +6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Precious Material and Location | RETAINER SILVER |
| Material Document and Classification | UNABLE TO DECODE |
| Overall Outside Diameter | 4.7241 INCHES MINIMUM AND 4.7244 INCHES MAXIMUM IN |
| Bore Diameter | 2.5589 INCHES MINIMUM AND 2.5591 INCHES MAXIMUM IN |
| Material Document and Classification | UNABLE TO DECODE |
| Load Direction | RADIAL |
| Standard Tolerance Designation | ABEC NO.7 |
| Material Document and Classification | UNABLE TO DECODE |
| Precious Material | SILVER |
| Load Direction | RADIAL |
| Material Document and Classification | UNABLE TO DECODE |
| Material | STEEL BALL |
| Material | STEEL OUTER RING |
| Style Designator | NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING |
| Surface Finish | GROUND |
| Material | COPPER ALLOY RETAINER |
| Material Document and Classification | UNABLE TO DECODE |
| Material | STEEL INNER RING |
| Retainer Fabrication Method | MACHINED |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| AAMM213-3SMBRDTE7103 PRIMARY | Timken Co Div the Timken Company (USA) |
NSN 3110-00-179-7323 is a Bearing,ball,duplex, manufactured by Timken Co Div the Timken Company, classified under FSC 3110 (No Item Name Available). Status: active.
NSN 3110-00-179-7323 has 1 cross-referenced part number: AAMM213-3SMBRDTE7103 (Timken Co Div the Timken Company).
There is 1 known substitute for 3110-00-179-7323: 3110-00-863-1206. Verify interchangeability with system specifications before substitution.
Key specifications for AAMM213-3SMBRDTE7103: Internal Clearance: 0.0033 INCHES MINIMUM RADIAL AND 0.0043 INCHES MAXIMUM RADIAL IN; Standard Tolerance Designation: ABEC NO.7; Internal Clearance: 0.0033 INCHES MINIMUM RADIAL AND 0.0043 INCHES MAXIMUM RADIAL IN; Material: STEEL INNER RING. 30 total characteristics are documented in the Federal Logistics Information System.