PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AAMM213-3SMBRDTE7103
AAMM213-3SMBRDTE7103 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: COPPER ALLOY RETAINER, bore_diameter: 65.00 MILLIMETERS NOMINAL MM, overall_width: 46.00 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-179-7323, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AAMM213-3SMBRDTE7103
NSN: 3110-00-179-7323
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialCOPPER ALLOY RETAINER
bore_diameter65.00 MILLIMETERS NOMINAL MM
overall_width46.00 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING
internal_clearance0.0033 INCHES MINIMUM RADIAL AND 0.0043 INCHES MAXIMUM RADIAL IN
overall_outside_diameter120.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.5
NSN3110-00-179-7323
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AAMM213-3SMBRDTE7103 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL CLEARANCE: 0.0033 INCHES MINIMUM RADIAL AND 0.0043 INCHES MAXIMUM RADIAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
MATERIAL: STEEL INNER RING
•
TEST DATA DOCUMENT: +6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
PRECIOUS MATERIAL AND LOCATION: RETAINER SILVER
•
PRECIOUS MATERIAL: SILVER
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL CLEARANCE0.0033 INCHES MINIMUM RADIAL AND 0.0043 INCHES MAXIMUM RADIAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.7
INTERNAL CLEARANCE0.0033 INCHES MINIMUM RADIAL AND 0.0043 INCHES MAXIMUM RADIAL IN
MATERIALSTEEL INNER RING
TEST DATA DOCUMENT+6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
PRECIOUS MATERIAL AND LOCATIONRETAINER SILVER
PRECIOUS MATERIALSILVER
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE, TANDEM MOUNTING
TEST DATA DOCUMENT+6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
PRECIOUS MATERIAL AND LOCATIONRETAINER SILVER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
2-300-011-02Interchangeable
interchangeable cross-reference
interchangeable
HTDZ213-2Interchangeable
interchangeable cross-reference
interchangeable
2-300-011Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AAMM213-3SMBRDTE7103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AAMM213-3SMBRDTE7103?
AAMM213-3SMBRDTE7103 is a FILTER,RADIO FREQUENCY INTERFERE.
What parts can replace AAMM213-3SMBRDTE7103?
There are 3 known substitutes for AAMM213-3SMBRDTE7103: 2-300-011-02, HTDZ213-2, 2-300-011. Substitute compatibility should be verified for your specific system.
What is the NSN for AAMM213-3SMBRDTE7103?
AAMM213-3SMBRDTE7103 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-179-7323. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AAMM213-3SMBRDTE7103

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026