PartsTable
Technical Data Sheet
PartsTable / MRO / 310632

310632 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PARTS KIT,ELECTRICAL ENGINE STAR. Key specifications include diameter: 5.0 MILLIMETERS MM, material: STEEL CORROSION RESISTING CUSHION, overall_width: 0.500 INCHES NOMINAL IN, overall_length: 200.0 MILLIMETERS NOMINAL MM, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System under NSN 5340-00-884-6753, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 310632
NSN: 5340-00-884-6753
FSC: 5340
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
diameter5.0 MILLIMETERS MM
materialSTEEL CORROSION RESISTING CUSHION
overall_width0.500 INCHES NOMINAL IN
overall_length200.0 MILLIMETERS NOMINAL MM
special_features5.0 MM CANNULATED DRILL BIT; QUICK COUPLING; 2.6 MM CANNULATION; FOR USE WITH 7.3 MM SCREWS; END ITEM: SCREW SET, BONE, NSN 6515-01-584-1951 MM
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
end_item_identificationTRANSITIONAL NETWORKING CAPABILITY
distance_from_loop_center_to_tongue_end1.001 INCHES NOMINAL IN
NSN5340-00-884-6753
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 310632 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE BAND
•
MATERIAL: STEEL CORROSION RESISTING BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.783 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.001 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER0.204 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
MATERIALSTEEL CORROSION RESISTING BAND
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.783 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END1.001 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
X218-10InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6C9-1621.25-X10.5T11InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6515NCM105327InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
16484InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 310632?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 310632?
310632 is a PARTS KIT,ELECTRICAL ENGINE STAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 310632?
There are 4 known substitutes for 310632: X218-10, 6C9-1621.25-X10.5T11, 6515NCM105327 and 1 more. Substitute compatibility should be verified for your specific system.
Is 310632 still available?
310632 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 310632

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026