PartsTable
Technical Data Sheet
16484 ✓ Verified by PartsTable
Legrand · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Compact, reliable 1000VA battery back-up UPS with 2 surge protected power outlets. Keeps your PC up and running when the power goes down; to let you save important data and avoid damaged hardware. 20.000 Euro warranty on connected equipment (check conditions on trust.com).

2 battery protected outputs for a back-up time up to 10 minutes (depending on load). Surge protected outputs to protect connected devices against damage from power surges and spikes. 2 additional RJ-11 connections to protect telephone, fax or modem.

Clear optical and acoustic indicators for power source and low battery. Overload and short circuit protection. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-282-4432, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
16484
NSN: 5305-00-282-4432
FSC: 5305
CAGE: 73734 — FEDERAL SCREW PRODUCTS, INC. (USA)
SPECIFICATIONS
diameter5.0 MILLIMETERS MM
overall_length200.0 MILLIMETERS NOMINAL MM
special_features5.0 MM CANNULATED DRILL BIT; QUICK COUPLING; 2.6 MM CANNULATION; FOR USE WITH 7.3 MM SCREWS; END ITEM: SCREW SET, BONE, NSN 6515-01-584-1951 MM
end_item_identification6515-01-584-1951 SCREW SET, BONE
part_name_assigned_by_controlling_agencyDRILL BIT CANNULATED QC 200MM MM
NSN5305-00-282-4432
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 16484 · Legrand ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SCREW SURFACE TREATMENT: PASSIVATE
THREAD DIRECTION: RIGHT-HAND
INTERNAL DRIVE STYLE: SLOT
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
FASTENER LENGTH: 0.406 INCHES NOMINAL IN
HEAD STYLE: FILLISTER
TECHNICAL CHARACTERISTICS (FLIS)
SCREW SURFACE TREATMENTPASSIVATE
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLESLOT
HEAD DIAMETER0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 4S STYLE
FASTENER LENGTH0.406 INCHES NOMINAL IN
HEAD STYLEFILLISTER
NOMINAL THREAD DIAMETER0.164 INCHES IN
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
530-873Interchangeable
interchangeable cross-reference
interchangeable
6705C35Interchangeable
interchangeable cross-reference
interchangeable
MIL-I-36698Interchangeable
interchangeable cross-reference
interchangeable
16484Interchangeable
interchangeable cross-reference
interchangeable
AN74-32PC28Interchangeable
interchangeable cross-reference
interchangeable
A1070-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 16484?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 16484?
16484 is a PARTS KIT,ELECTRICAL ENGINE STAR manufactured by Legrand.
What parts can replace 16484?
There are 14 known substitutes for 16484: 530-873, 6705C35, MIL-I-36698 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 16484?
16484 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-282-4432. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 16484