The Belt,positive Drive, cataloged under National Stock Number 3030-01-264-1740, is classified within Federal Supply Class 3030 (No Item Name Available) of the Mechanical Power Transmission Equipment group. The primary manufacturer of record is Designatronics Inc Stock Drive Products Div. Government technical data includes 5 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3030-01-264-1740 |
| Primary Part Number | A6R6-0750180 |
| Item Name | Belt,positive Drive |
| FSC / FSG | 3030 / 30 — No Item Name Available |
| Manufacturer | Designatronics Inc Stock Drive Products Div |
| Status | ACTIVE |
| Material | UNABLE TO DECODE |
| Supplementary Features | PITCH (TOOTH-TO-TOOTH): 0.0816" + OR - 0.002"; PITCH LENGTH: 6.120" + OR - 0.030"; BELT THICKNESS: 0.046" + OR - 0.010"; WIDTH: 0.187" + OR - 0.015"; TENSILE STRENGTH: 85LBS; TEMPERATURE RANGE: -40 DEGREES CELSIUS TO 90 DEGREES CELSIUS LBS |
| Drive Type and Quantity | 75 TEETH |
| Nominal Pitch Distance | 0.081 INCHES IN |
| Special Test Features | MINIMUM PULLEY DIAMETER: 0.26" (10 TEETH); INSTALLED BELT TENSION (NOMINAL): 6.75LBS; POLYESTER CORD USED IN THE BELTS SHALL BE TESTED AS FOLLOWS: BREAK STRENGTH PER ASTM D-2256; ELONGATION PER ASTM D-2256; TWIST PER ASTM D-1423; BODY OF BELT, INCLUDING THE TEETH, SHALL BE MOLDED IN AN ENDLES BET FROM POLYESTER PLASTIC MEETING THE REQUIREMENTS OF ASTM-638 LBS |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 75TX3/1640DP | Fenner America Inc Fenner Manheim Div (USA) |
| A3034799 | Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir (USA) |
| A6R6-0750180 PRIMARY | Designatronics Inc Stock Drive Products Div (USA) |
NSN 3030-01-264-1740 is a Belt,positive Drive, manufactured by Designatronics Inc Stock Drive Products Div, classified under FSC 3030 (No Item Name Available). Status: active.
NSN 3030-01-264-1740 has 3 cross-referenced part numbers: 75TX3/1640DP (Fenner America Inc Fenner Manheim Div), A3034799 (Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir), A6R6-0750180 (Designatronics Inc Stock Drive Products Div).
There is 1 known substitute for 3030-01-264-1740: 3030-01-138-5638. Verify interchangeability with system specifications before substitution.
Key specifications for A6R6-0750180: Material: UNABLE TO DECODE; Supplementary Features: PITCH (TOOTH-TO-TOOTH): 0.0816" + OR - 0.002"; PITCH LENGTH: 6.120" + OR - 0.030"; BELT THICKNESS: 0.046" + OR - 0.010"; WIDTH: 0.187" + OR - 0.015"; TENSILE STRENGTH: 85LBS; TEMPERATURE RANGE: -40 DEGREES CELSIUS TO 90 DEGREES CELSIUS LBS; Drive Type and Quantity: 75 TEETH; Part Name Assigned by Controlling Agency: BELT DRIVE. 7 total characteristics are documented in the Federal Logistics Information System.