The BELT,POSITIVE DRIVE is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, nominal_pitch_distance: 0.081 INCHES IN, drive_type_and_quantity: 75 TEETH, part_name_assigned_by_controlling_agency: BELT DRIVE. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3030-01-264-1740, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | UNABLE TO DECODE |
| special_features | SHAPE: THE BELT SHALL BE AN ENDLESS LOOP WITH TEETH AND BODY MOLDED OVER FABRIC CORD; THERE SHALL BE NO DISCERNABLE SEAMS OR JOIN MARKS |
| nominal_pitch_distance | 0.081 INCHES IN |
| drive_type_and_quantity | 75 TEETH |
| part_name_assigned_by_controlling_agency | BELT DRIVE |
| NSN | 3030-01-264-1740 |
| MATERIAL | UNABLE TO DECODE |
| SUPPLEMENTARY FEATURES | PITCH (TOOTH-TO-TOOTH): 0.0816" + OR - 0.002"; PITCH LENGTH: 6.120" + OR - 0.030"; BELT THICKNESS: 0.046" + OR - 0.010"; WIDTH: 0.187" + OR - 0.015"; TENSILE STRENGTH: 85LBS; TEMPERATURE RANGE: -40 DEGREES CELSIUS TO 90 DEGREES CELSIUS LBS |
| DRIVE TYPE AND QUANTITY | 75 TEETH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BELT DRIVE |
| NOMINAL PITCH DISTANCE | 0.081 INCHES IN |
| SPECIAL FEATURES | SHAPE: THE BELT SHALL BE AN ENDLESS LOOP WITH TEETH AND BODY MOLDED OVER FABRIC CORD; THERE SHALL BE NO DISCERNABLE SEAMS OR JOIN MARKS |
| SPECIAL TEST FEATURES | MINIMUM PULLEY DIAMETER: 0.26" (10 TEETH); INSTALLED BELT TENSION (NOMINAL): 6.75LBS; POLYESTER CORD USED IN THE BELTS SHALL BE TESTED AS FOLLOWS: BREAK STRENGTH PER ASTM D-2256; ELONGATION PER ASTM D-2256; TWIST PER ASTM D-1423; BODY OF BELT, INCLUDING THE TEETH, SHALL BE MOLDED IN AN ENDLES BET FROM POLYESTER PLASTIC MEETING THE REQUIREMENTS OF ASTM-638 LBS |