PartsTable
Technical Data Sheet
Download PDF

3024685 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3024685: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 10.125 INCHES NOMINAL IN, aperture_diameter: 7.250 INCHES NOMINAL IN, bolt_circle_diameter: 8.438 INCHES NOMINAL IN, cross-sectional_thickness: 0.013 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-589-5870, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3024685
NSN: 5330-00-589-5870
FSC: 5330 — Packing and Gasket Materials
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
hole_diameter0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter10.125 INCHES NOMINAL IN
aperture_diameter7.250 INCHES NOMINAL IN
bolt_circle_diameter8.438 INCHES NOMINAL IN
cross-sectional_thickness0.013 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-589-5870
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3024685 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.013 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 10.125 INCHES NOMINAL IN
•
APERTURE DIAMETER: 7.250 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 8.438 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.013 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER10.125 INCHES NOMINAL IN
APERTURE DIAMETER7.250 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER8.438 INCHES NOMINAL IN
HOLE DIAMETER0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
136714Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3024685?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3024685?
3024685 is a GASKET.
What parts can replace 3024685?
There is 1 known substitute for 3024685: 136714. Substitute compatibility should be verified for your specific system.
What is the NSN for 3024685?
3024685 is cataloged in the U.S. Government catalog under NSN 5330-00-589-5870. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3024685