PartsTable
Technical Data Sheet
Download PDF

136714 — TERMINAL BOX

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

136714: TERMINAL BOX.

- Optimum protection for the Samsung Galaxy S6 from dirt and scratches as the smartphone can be used in the folding case - Insert compartments for safe storage of cards or the like - Quick access to the smartphone, the device does not have to be removed from the case - Openings for full access to connections - Slim smartphone case with a silky surface that is pleasant to the touch - Without fastener This part is cataloged in the U.S. Government catalog under NSN 5340-00-511-5848, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
136714
NSN: 5340-00-511-5848
NIINs: 005115848, 005895870, 015136331, 017015307
FSC: 5340 — Hardware, Commercial
CAGE: 16240 — WESTERN SPRING AND MFG CO (USA)
SPECIFICATIONS
width0.312 INCHES NOMINAL IN
length0.250 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_height0.625 INCHES NOMINAL IN
outside_diameter10.125 INCHES NOMINAL IN
aperture_diameter7.250 INCHES NOMINAL IN
material_thickness0.015 INCHES NOMINAL IN
bolt_circle_diameter8.438 INCHES NOMINAL IN
loop/holding_dimension0.437 INCHES NOMINAL IN
end_item_identificationDIRECT VENDOR DELIVERY(DVD),MODEL XM1117,ARMORED SECURITY VEHICLE(ASV),NSN 2320-01-437-6957,CAGE 10237,PART NUMBER 216098,TM 9-2320-307-24P,CONTRACT DAAE07-99-C-S001
cross-sectional_thickness0.013 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
NSN5340-00-511-5848
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 136714 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.250 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.437 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.015 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.187 INCHES NOMINAL IN
•
WIDTH: 0.312 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.625 INCHES NOMINAL IN
LENGTH0.250 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.437 INCHES NOMINAL IN
MATERIAL THICKNESS0.015 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.187 INCHES NOMINAL IN
WIDTH0.312 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.093 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
S136714Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 136714?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 136714?
136714 is a TERMINAL BOX manufactured by Hama.
What parts can replace 136714?
There is 1 known substitute for 136714: S136714. Substitute compatibility should be verified for your specific system.
What is the NSN for 136714?
136714 is cataloged in the U.S. Government catalog under NSN 5340-00-511-5848. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 136714