PartsTable
Technical Data Sheet
30167 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,STAVE SHAPED is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, material: STEEL CORROSION RESISTING BODY, body_length: 1.950 INCHES NOMINAL IN, design_type: REUSABLE, intake_hole: NOT INCLUDED, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5119, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30167
NSN: 5331-00-167-5119
FSC: 5331 — O-RING
CAGE: 95169 — CURTISS-WRIGHT FLOW CONTROL CORPORATION DBA CURTISS-WRIGHT FLOW CONTROL CO DIV TARGET ROCK DIVISION (USA)
SPECIFICATIONS
shapeRECTANGULAR
materialSTEEL CORROSION RESISTING BODY
body_length1.950 INCHES NOMINAL IN
design_typeREUSABLE
intake_holeNOT INCLUDED
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
valve_recessNOT INCLUDED
bore_diameter8.125 INCHES NOMINAL IN
drop_pressureERR-060
chamfer_length0.312 INCHES NOMINAL IN
overall_length8.938 INCHES NOMINAL IN
hardness_rating75.0 SHORE DUROMETER A NOMINAL
NSN5331-00-167-5119
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30167 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
ELONGATION PERCENTAGE: 125 MAXIMUM
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER: 1.859 INCHES MINIMUM AND 1.901 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 1.659 INCHES MINIMUM AND 1.689 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER1.859 INCHES MINIMUM AND 1.901 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.659 INCHES MINIMUM AND 1.689 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
AS3209-013Interchangeable
interchangeable cross-reference
interchangeable
9004104-0130Interchangeable
interchangeable cross-reference
interchangeable
12130-91Interchangeable
interchangeable cross-reference
interchangeable
H60MLQ30167Interchangeable
interchangeable cross-reference
interchangeable
30167Interchangeable
interchangeable cross-reference
interchangeable
MIL-B-17901Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30167?
30167 is a BEARING,STAVE SHAPED.
What parts can replace 30167?
There are 24 known substitutes for 30167: AS3209-013, 9004104-0130, 12130-91 and 21 more. Substitute compatibility should be verified for your specific system.
Is 30167 still available?
30167 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30167