PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/1-131DS
M83248/1-131DS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/1-131DS is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5119, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/1-131DS
NSN: 5331-00-167-5119
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberM83248/1-131DS
NSN5331-00-167-5119
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/1-131DS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 1.859 INCHES MINIMUM AND 1.901 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.659 INCHES MINIMUM AND 1.689 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER1.859 INCHES MINIMUM AND 1.901 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.659 INCHES MINIMUM AND 1.689 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
AS3209-013Interchangeable
interchangeable cross-reference
interchangeable
9004104-0130Interchangeable
interchangeable cross-reference
interchangeable
12130-91Interchangeable
interchangeable cross-reference
interchangeable
H60MLQ30167Interchangeable
interchangeable cross-reference
interchangeable
30167Interchangeable
interchangeable cross-reference
interchangeable
MIL-B-17901Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/1-131DS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/1-131DS?
M83248/1-131DS is a M83248/1-131DS.
What parts can replace M83248/1-131DS?
There are 23 known substitutes for M83248/1-131DS: AS3209-013, 9004104-0130, 12130-91 and 20 more. Substitute compatibility should be verified for your specific system.
Is M83248/1-131DS still available?
M83248/1-131DS is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/1-131DS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026