PartsTable
Technical Data Sheet
PartsTable / O-RING / 30-0464-5
30-0464-5 ✓ Verified by PartsTable
Zebra · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Zebra's selection of label and tag materials meets the requirements of most applications and budgets.<br><br>Standard, bright white smooth paper facestock specially coated to provide the optimal balance between performance and price. Available in thermal transfer and direct thermal. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-842-9255, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30-0464-5
NSN: 5331-00-842-9255
FSC: 5331 — O-RING
CAGE: 70061 — LYDALL INC ELASTOMER PRODUCTS GROUP (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter1.983 INCHES MINIMUM AND 2.025 INCHES MAXIMUM IN
center_hole_diameter1.849 INCHES MINIMUM AND 1.879 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-842-9255
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30-0464-5 MFR: Zebra ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.301 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.301 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
1497Interchangeable
interchangeable cross-reference
interchangeable
13889-13836Interchangeable
interchangeable cross-reference
interchangeable
FFB187TYPE751Interchangeable
interchangeable cross-reference
interchangeable
410-30Interchangeable
interchangeable cross-reference
interchangeable
SR383Interchangeable
interchangeable cross-reference
interchangeable
999Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30-0464-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30-0464-5?
30-0464-5 is a O-RING manufactured by Zebra.
What parts can replace 30-0464-5?
There are 26 known substitutes for 30-0464-5: 1497, 13889-13836, FFB187TYPE751 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30-0464-5?
30-0464-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-842-9255. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30-0464-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026