PartsTable
Technical Data Sheet
Download PDF

13889-13836 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

13889-13836: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.3750 INCHES NOMINAL IN, cone_width: 0.4688 INCHES NOMINAL IN, bore_diameter: 1.5000 INCHES NOMINAL IN, overall_width: 1.5000 INCHES NOMINAL IN, standout_width: 0.1250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-5994, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13889-13836
NSN: 3110-00-100-5994
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.3750 INCHES NOMINAL IN
cone_width0.4688 INCHES NOMINAL IN
bore_diameter1.5000 INCHES NOMINAL IN
overall_width1.5000 INCHES NOMINAL IN
standout_width0.1250 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0620 INCHES NOMINAL IN
backface_corner_radius0.0310 INCHES NOMINAL IN
overall_outside_diameter2.5625 INCHES NOMINAL IN
nondefinitive_spec/std_data751 TYPE
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-5994
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 13889-13836 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.3750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 2.5625 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 751 TYPE
•
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.1250 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH0.3750 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH1.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.5625 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0310 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA751 TYPE
CONE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDOUT WIDTH0.1250 INCHES NOMINAL IN
CONE WIDTH0.4688 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SUBSTITUTES & CROSS-REFERENCES 5
1497Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFB187TYPE751Reference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-59649Reference document
Same NSN cross-reference
Reference document — Identification reference
63A81B233Reference document
Same NSN cross-reference
Reference document — Secondary reference
AA59649-170Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 13889-13836?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13889-13836?
13889-13836 is a BEARING,ROLLER,TAPERED.
What parts can replace 13889-13836?
There are 5 known substitutes for 13889-13836: 1497, FFB187TYPE751, A-A-59649 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13889-13836?
13889-13836 is cataloged in the U.S. Government catalog under NSN 3110-00-100-5994. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13889-13836

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.