PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3-912
3-912 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include color: BLACK, material: STEEL, unit_type: CROWN, body_style: BUSHING MOUNTED, body_width: 1.390 INCHES NOMINAL IN, body_height: 2.190 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-118-3015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3-912
NSN: 5310-00-118-3015
FSC: 5310
CAGE: 21102 — EVANS TEMPCON MICHIGAN, LLC (USA)
SPECIFICATIONS
colorBLACK
materialSTEEL
unit_typeCROWN
body_styleBUSHING MOUNTED
body_width1.390 INCHES NOMINAL IN
body_height2.190 INCHES NOMINAL IN
body_length2.630 INCHES NOMINAL IN
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
body_diameter0.250 INCHES NOMINAL IN
hole_diameter0.625 INCHES NOMINAL IN
overall_width4.500 INCHES NOMINAL IN
alignment_typeRIGID
NSN5310-00-118-3015
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3-912 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.035 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.035 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
CV2031340-8301VEQPC49Interchangeable
interchangeable cross-reference
interchangeable
201-365PC70Interchangeable
interchangeable cross-reference
interchangeable
201-370PC49Interchangeable
interchangeable cross-reference
interchangeable
D2500FF-B16.24 ITEM 19Interchangeable
interchangeable cross-reference
interchangeable
AS3581-912Interchangeable
interchangeable cross-reference
interchangeable
5331PL2221414Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3-912?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3-912?
3-912 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 3-912?
There are 20 known substitutes for 3-912: CV2031340-8301VEQPC49, 201-365PC70, 201-370PC49 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3-912?
3-912 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-118-3015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3-912

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026