PartsTable
Technical Data Sheet
2WC6 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include duty_type: CONTINUOUS, overall_width: 1.400 INCHES NOMINAL IN, overall_height: 2.120 INCHES NOMINAL IN, overall_length: 1.400 INCHES NOMINAL IN, special_features: STYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200, supplementary_features: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-594-5519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2WC6
NSN: 5330-00-594-5519
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
duty_typeCONTINUOUS
coil_quantity1
overall_width1.400 INCHES NOMINAL IN
overall_height2.120 INCHES NOMINAL IN
overall_length1.400 INCHES NOMINAL IN
special_featuresSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
winding_quantity1
supplementary_featuresCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
environmental_protectionDUSTPROOF
winding_dc_resistance_rating45.0 OHMS NOMINAL SINGLE WINDING
nominal_operating_current_rating_and_type50.0 MILLIAMPERES DC SINGLE WINDING
main_contact_maximum_voltage_rating_in_volts24.0 DC
NSN5330-00-594-5519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2WC6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
200164Interchangeable
interchangeable cross-reference
interchangeable
292-235Interchangeable
interchangeable cross-reference
interchangeable
226Interchangeable
interchangeable cross-reference
interchangeable
4194745Interchangeable
interchangeable cross-reference
interchangeable
4-1930-2900-201Interchangeable
interchangeable cross-reference
interchangeable
410230-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2WC6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2WC6?
2WC6 is a RELAY,ELECTROMAGNETIC.
What parts can replace 2WC6?
There are 10 known substitutes for 2WC6: 200164, 292-235, 226 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2WC6?
2WC6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-594-5519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2WC6