PartsTable
Technical Data Sheet
PartsTable / MRO / 200164
200164 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: STEEL OVERALL, point_type: CONVENTIONAL, shaft_type: ROUND SINGLE ACTUATOR, point_angle: 118.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-3114, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 200164
NSN: 5310-00-011-3114
FSC: 5310
CAGE: 02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeCONVENTIONAL
shaft_typeROUND SINGLE ACTUATOR
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length0.625 INCHES NOMINAL IN
shaft_length0.438 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A SINGLE MOUNTING FACILITY A
hole_diameter0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
overall_width0.937 INCHES NOMINAL IN
pole_quantity3 SINGLE SECTION REAR
terminal_typeTAB, SOLDER LUG
NSN5310-00-011-3114
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 200164 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.047 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
NONDEFINITIVE SPEC/STD DATA: 1 STYLE AND A CLASS
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
HOLE DIAMETER: 0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
OUTSIDE DIAMETER: 0.489 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.047 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
NONDEFINITIVE SPEC/STD DATA1 STYLE AND A CLASS
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
OUTSIDE DIAMETER0.489 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
D29778-261Interchangeable
interchangeable cross-reference
interchangeable
3307511Interchangeable
interchangeable cross-reference
interchangeable
901048Interchangeable
interchangeable cross-reference
interchangeable
853-1038Interchangeable
interchangeable cross-reference
interchangeable
853-152Interchangeable
interchangeable cross-reference
interchangeable
750-9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 200164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200164?
200164 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 200164?
There are 30 known substitutes for 200164: D29778-261, 3307511, 901048 and 27 more. Substitute compatibility should be verified for your specific system.
Is 200164 still available?
200164 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026