Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include material: CERAMIC, overall_height: 2.078 INCHES NOMINAL IN, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.438 INCHES NOMINAL IN, first_leg_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-515-0571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2C5
NSN:5340-00-515-0571 FSC:5340 CAGE:43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
material
CERAMIC
overall_height
2.078 INCHES NOMINAL IN
first_leg_angle
90.0 DEGREES NOMINAL
first_leg_style
CORNER RADIUS
first_leg_width
1.438 INCHES NOMINAL IN
first_leg_length
0.625 INCHES NOMINAL IN
orifice_diameter
0.312 INCHES NOMINAL IN
second_leg_style
END RADIUS AND TAPERED
second_leg_width
1.438 INCHES NOMINAL IN
special_features
FOR SHORT FRONT END AND STANDARD CUP STYLE
style_designator
C CAP, SPRING LOADED, PILLAR TYPE HOLD DOWN
second_leg_length
1.125 INCHES NOMINAL IN
NSN
5340-00-515-0571
COMPONENT DIAGRAM
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 0.625 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.040 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.938 INCHES NOMINAL IN
•
SECOND LEG STYLE: END RADIUS AND TAPERED
•
FIRST LEG HOLE DIAMETER: 0.127 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
FIRST LEG CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
TYPICAL APPLICATIONS
RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.250 INCHES NOMINAL IN
FIRST LEG LENGTH
0.625 INCHES NOMINAL IN
FIRST LEG THICKNESS
0.040 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2C5?
2C5 is a CAPACITOR,FIXED,METALLIZED,PAPER.
What parts can replace 2C5?
There are 4 known substitutes for 2C5: 2C5, 352250022979, 990C200H03 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2C5?
2C5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-515-0571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.