PartsTable / O-RING / S8-41
S8-41
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include material: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR, center_hole_diameter: 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-585-0396, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
S8-41
NSN: 5331-00-585-0396 FSC: 5331 — O-RINGCAGE: 93776 — SUPERDRAULIC CORP (USA)
SPECIFICATIONS
material RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR center_hole_diameter 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-585-0396
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: S8-41
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• MATERIAL: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
• CENTER HOLE DIAMETER: 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN MATERIAL RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR CENTER HOLE DIAMETER 2.719 INCHES MINIMUM AND 2.749 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
100-232 Interchangeable interchangeable cross-reference
interchangeable
10383907 Interchangeable interchangeable cross-reference
interchangeable
142767 Interchangeable interchangeable cross-reference
interchangeable
FTSM74L5 Interchangeable interchangeable cross-reference
interchangeable
1112-32 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy S8-41?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S8-41?
S8-41 is a CAPACITOR,FIXED,METALLIZED,PAPER.
What parts can replace S8-41?
There are 20 known substitutes for S8-41: 100-232, 10383907, 142767 and 17 more. Substitute compatibility should be verified for your specific system.
Is S8-41 still available?
S8-41 is currently cancelled.