PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2929017-3
2929017-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC PACKING, construction: ONE-PIECE, outside_diameter: 0.469 INCHES NOMINAL IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.051 INCHES NOMINAL IN, packing_inside_diameter: 0.198 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-492-8686, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2929017-3
NSN: 5330-00-492-8686
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
constructionONE-PIECE
outside_diameter0.469 INCHES NOMINAL IN
surface_treatmentCADMIUM RETAINER
retainer_thickness0.051 INCHES NOMINAL IN
packing_inside_diameter0.198 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
NSN5330-00-492-8686
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2929017-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER THICKNESS: 0.051 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
•
OUTSIDE DIAMETER: 0.469 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM RETAINER
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
PACKING INSIDE DIAMETER: 0.198 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER THICKNESS0.051 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
OUTSIDE DIAMETER0.469 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM RETAINER
MATERIALRUBBER SYNTHETIC PACKING
MATERIALSTEEL RETAINER
PACKING INSIDE DIAMETER0.198 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
7500-10Interchangeable
interchangeable cross-reference
interchangeable
NYLC1316Interchangeable
interchangeable cross-reference
interchangeable
6052-1000Interchangeable
interchangeable cross-reference
interchangeable
906052-1000Interchangeable
interchangeable cross-reference
interchangeable
7500X10Interchangeable
interchangeable cross-reference
interchangeable
4730PL0143313Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2929017-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2929017-3?
2929017-3 is a PACKING WITH RETAINER.
What parts can replace 2929017-3?
There are 14 known substitutes for 2929017-3: 7500-10, NYLC1316, 6052-1000 and 11 more. Substitute compatibility should be verified for your specific system.
Is 2929017-3 still available?
2929017-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2929017-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026