PartsTable
Technical Data Sheet
PartsTable / MRO / 7500-10
7500-10 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,LATCH,REFUELING is a the manufacturer industrial component. Key specifications include color: BLACK, shape: CYLINDRICAL, material: STEEL CASE, case_style: SQUARE, flow_angle: 90.0 DEGREES, leg_length: 1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM ALL ENDS IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-0313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7500-10
NSN: 5330-00-006-0313
FSC: 5330
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
colorBLACK
shapeCYLINDRICAL
materialSTEEL CASE
case_styleSQUARE
flow_angle90.0 DEGREES
leg_length1.453 INCHES MINIMUM AND 1.500 INCHES MAXIMUM ALL ENDS IN
seal_width0.064 INCHES NOMINAL IN
seat_angle37.0 DEGREES ALL ENDS
constructionONE-PIECE
thread_class3A ALL ENDS A
overall_width0.870 INCHES NOMINAL IN
terminal_typeSOLDER TAB TOP
NSN5330-00-006-0313
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7500-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.051 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.469 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM RETAINER
•
CONSTRUCTION: ONE-PIECE
•
MATERIAL: STEEL RETAINER
•
RETAINER THICKNESS: 0.051 INCHES NOMINAL IN
•
PACKING INSIDE DIAMETER: 0.469 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PACKING RING CROSS-SECTIONAL DIAMETER0.051 INCHES NOMINAL IN
OUTSIDE DIAMETER0.469 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM RETAINER
CONSTRUCTIONONE-PIECE
MATERIALSTEEL RETAINER
MATERIALRUBBER SYNTHETIC PACKING
RETAINER THICKNESS0.051 INCHES NOMINAL IN
PACKING INSIDE DIAMETER0.469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
7500-10Interchangeable
interchangeable cross-reference
interchangeable
6052-1000Interchangeable
interchangeable cross-reference
interchangeable
906052-1000Interchangeable
interchangeable cross-reference
interchangeable
7500X10Interchangeable
interchangeable cross-reference
interchangeable
4730PL0143313Interchangeable
interchangeable cross-reference
interchangeable
2587057Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7500-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7500-10?
7500-10 is a RETAINER,LATCH,REFUELING. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7500-10?
There are 15 known substitutes for 7500-10: 7500-10, 6052-1000, 906052-1000 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7500-10?
7500-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-0313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7500-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026