PartsTable
Technical Data Sheet
Download PDF

27882 — GEAR ASSEMBLY,SPEED DECREASER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

27882: GEAR ASSEMBLY,SPEED DECREASER.

The GEAR ASSEMBLY,SPEED DECREASER is a the manufacturer industrial component. Key specifications include end_item_identification: 2310-01-595-3986;TRUCK,AMBULANCE, part_name_assigned_by_controlling_agency: PLANETARY ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-4480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
27882
NSN: 3110-00-100-4480
NIINs: 001004480, 004208812, 013981126, 016169025
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
end_item_identification2310-01-595-3986;TRUCK,AMBULANCE
part_name_assigned_by_controlling_agencyPLANETARY ASSEMBLY
NSN3110-00-100-4480
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 27882 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.7500 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.1875 INCHES NOMINAL IN
•
CONE WIDTH: 1.0100 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TECHNICAL CHARACTERISTICS
CUP WIDTH0.7500 INCHES NOMINAL IN
OVERALL WIDTH0.9375 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0310 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.1875 INCHES NOMINAL IN
CONE WIDTH1.0100 INCHES NOMINAL IN
SPECIAL FEATURESROLLER BEARING STYLE:NO. 370 OF OLD FIIG A04400;RETAINER FABRICATION METHOD:ANY ACCEPTABLE;SEPERATION FEATURE:INCLUDED;BEARING OD:3.0000 IN. NOM. IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.5000 INCHES NOMINAL IN
MATERIALSTEEL RETAINER
SUBSTITUTES & CROSS-REFERENCES 8
10085886Reference document
Same NSN cross-reference
Reference document — Informative reference only
PG-9002 ITEMS 108 AND 109Reference document
Same NSN cross-reference
Reference document — Secondary reference
3110PL0882895Reference document
Same NSN cross-reference
Reference document — Informative reference only
A2477CReference document
Same NSN cross-reference
Reference document — Secondary reference
SK203-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
2788-2729Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 27882?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 27882?
27882 is a GEAR ASSEMBLY,SPEED DECREASER.
What parts can replace 27882?
There are 8 known substitutes for 27882: 10085886, PG-9002 ITEMS 108 AND 109, 3110PL0882895 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 27882?
27882 is cataloged in the U.S. Government catalog under NSN 3110-00-100-4480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 27882