PartsTable
Technical Data Sheet
Download PDF

3110PL0882895 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3110PL0882895: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL COMP 4320 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E52100 ROLLER, cup_width: 0.7500 INCHES NOMINAL IN, cone_width: 1.0100 INCHES NOMINAL IN, bore_diameter: 1.5000 INCHES NOMINAL IN, overall_width: 0.9375 INCHES NOMINAL IN, standout_width: 0.1875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-4480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3110PL0882895
NSN: 3110-00-100-4480
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 4320 OR STEEL COMP 4620 OR STEEL COMP 8620 OR STEEL COMP E52100 ROLLER
cup_width0.7500 INCHES NOMINAL IN
cone_width1.0100 INCHES NOMINAL IN
bore_diameter1.5000 INCHES NOMINAL IN
overall_width0.9375 INCHES NOMINAL IN
standout_width0.1875 INCHES NOMINAL IN
special_featuresROLLER BEARING STYLE:NO. 370 OF OLD FIIG A04400;RETAINER FABRICATION METHOD:ANY ACCEPTABLE;SEPERATION FEATURE:INCLUDED;BEARING OD:3.0000 IN. NOM. IN
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.0310 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-4480
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3110PL0882895 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.7500 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.1875 INCHES NOMINAL IN
•
CONE WIDTH: 1.0100 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH0.7500 INCHES NOMINAL IN
OVERALL WIDTH0.9375 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0310 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.1875 INCHES NOMINAL IN
CONE WIDTH1.0100 INCHES NOMINAL IN
SPECIAL FEATURESROLLER BEARING STYLE:NO. 370 OF OLD FIIG A04400;RETAINER FABRICATION METHOD:ANY ACCEPTABLE;SEPERATION FEATURE:INCLUDED;BEARING OD:3.0000 IN. NOM. IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.5000 INCHES NOMINAL IN
MATERIALSTEEL RETAINER
SUBSTITUTES & CROSS-REFERENCES 8
10085886Reference document
Same NSN cross-reference
Reference document — Informative reference only
PG-9002 ITEMS 108 AND 109Reference document
Same NSN cross-reference
Reference document — Secondary reference
A2477CReference document
Same NSN cross-reference
Reference document — Secondary reference
SK203-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
2788-2729Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS19081-47Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3110PL0882895?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3110PL0882895?
3110PL0882895 is a BEARING,ROLLER,TAPERED.
What parts can replace 3110PL0882895?
There are 8 known substitutes for 3110PL0882895: 10085886, PG-9002 ITEMS 108 AND 109, A2477C and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3110PL0882895?
3110PL0882895 is cataloged in the U.S. Government catalog under NSN 3110-00-100-4480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3110PL0882895