PartsTable
Technical Data Sheet
Download PDF

271507 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

271507: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, hardness_rating: 121.0 BRINELL STANDARD MINIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-208-6826, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
271507
NSN: 5310-00-208-6826
FSC: 5310 — Nuts and Washers
CAGE: 00000
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
hardness_rating121.0 BRINELL STANDARD MINIMUM
thread_directionRIGHT-HAND
surface_treatmentPHOSPHATE ZINC OVERALL
width_across_flats0.6750 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN
nominal_thread_size0.438 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch20
NSN5310-00-208-6826
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 271507 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.6750 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232,TY Z,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
HARDNESS RATING: 121.0 BRINELL STANDARD MINIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
NUT HEIGHT: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PHOSPHATE ZINC OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.6750 INCHES MINIMUM AND 0.6875 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232,TY Z,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
HARDNESS RATING121.0 BRINELL STANDARD MINIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NUT HEIGHT0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
SURFACE TREATMENTPHOSPHATE ZINC OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 3
FFN836GR0UPBTYPE1STYLE1Reference document
Same NSN cross-reference
Reference document — Identification reference
MS35690-726Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A10893Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 271507?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 271507?
271507 is a NUT,PLAIN,HEXAGON.
What parts can replace 271507?
There are 3 known substitutes for 271507: FFN836GR0UPBTYPE1STYLE1, MS35690-726, A10893. Substitute compatibility should be verified for your specific system.
What is the NSN for 271507?
271507 is cataloged in the U.S. Government catalog under NSN 5310-00-208-6826. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 271507