PartsTable
Technical Data Sheet
Download PDF

FFN836GR0UPBTYPE1STYLE1 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FFN836GR0UPBTYPE1STYLE1: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.831 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, hardness_rating: 121.0 BRINELL STANDARD MINIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-045-1449, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFN836GR0UPBTYPE1STYLE1
NSN: 5310-00-045-1449
NIINs: 000451449, 002086826, 005775476, 005775477, 006556932, 007215965
FSC: 5310 — Nuts and Washers
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.831 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
hardness_rating121.0 BRINELL STANDARD MINIMUM
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_across_flats1.450 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
nominal_thread_size1.000 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch12
NSN5310-00-045-1449
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FFN836GR0UPBTYPE1STYLE1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.4880 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-611-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.218 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.4880 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-611-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.218 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH20
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
33823SReference document
Same NSN cross-reference
Reference document — Secondary reference
113739Reference document
Same NSN cross-reference
Reference document — Secondary reference
BBTX2ABReference document
Same NSN cross-reference
Reference document — Secondary reference
451449Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy FFN836GR0UPBTYPE1STYLE1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFN836GR0UPBTYPE1STYLE1?
FFN836GR0UPBTYPE1STYLE1 is a NUT,PLAIN,HEXAGON.
What parts can replace FFN836GR0UPBTYPE1STYLE1?
There are 4 known substitutes for FFN836GR0UPBTYPE1STYLE1: 33823S, 113739, BBTX2AB and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFN836GR0UPBTYPE1STYLE1?
FFN836GR0UPBTYPE1STYLE1 is cataloged in the U.S. Government catalog under NSN 5310-00-045-1449. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFN836GR0UPBTYPE1STYLE1