PartsTable
Technical Data Sheet
PartsTable / MRO / 27093
27093 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Premium quality is achieved by using appropriate thick cardboard, a special non-reflective layer, and puzzle pieces’ perfect fitting. Key specifications include material: RUBBER BODY, cone_width: 1.1875 INCHES NOMINAL IN, bore_diameter: 2.8750 INCHES NOMINAL IN, terminal_type: WIRE LEAD, overall_length: 4.500 INCHES NOMINAL IN, outside_diameter: 9.660 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-126-5209, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 27093
NSN: 5330-00-126-5209
FSC: 5330
CAGE: 96371 — NI INDUSTRIES INC THERMADOR/WASTE KING DIV (USA)
SPECIFICATIONS
materialRUBBER BODY
cone_width1.1875 INCHES NOMINAL IN
bore_diameter2.8750 INCHES NOMINAL IN
terminal_typeWIRE LEAD
overall_length4.500 INCHES NOMINAL IN
outside_diameter9.660 INCHES NOMINAL IN
performance_typeSTANDARD CAPACITY
special_featuresMATERIAL: STAINLESS STEEL; PORT SIZE 1-1/2 IN, NPT; FLOW SETTING 1.5 GPM IN
style_designatorPLAIN
aperture_diameter9.430 INCHES NOMINAL IN
cone_corner_radius0.1400 INCHES NOMINAL IN
cross-sectional_sizeA
NSN5330-00-126-5209
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 27093 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96,CL B FED SPEC ALL MATERIAL RESPONSES OVERALL
•
APERTURE DIAMETER: 9.430 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL IN
•
MATERIAL: PAPER AND RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 9.660 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96,CL B FED SPEC ALL MATERIAL RESPONSES OVERALL
APERTURE DIAMETER9.430 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL IN
MATERIALPAPER AND RUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER9.660 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
33287Interchangeable
interchangeable cross-reference
interchangeable
7451572Interchangeable
interchangeable cross-reference
interchangeable
27093Interchangeable
interchangeable cross-reference
interchangeable
65001912Interchangeable
interchangeable cross-reference
interchangeable
00737 SHAPE 25 C/S SHAPE 164Interchangeable
interchangeable cross-reference
interchangeable
A39Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 27093?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 27093?
27093 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 27093?
There are 10 known substitutes for 27093: 33287, 7451572, 27093 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 27093?
27093 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-126-5209. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 27093

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026